SpeedFun FURIOUS for Fazua

104,00

SpeedFun FURIOUS is an electronic and intelligent speed release device that requires no external power supply.

It is designed to evade the speed block at 25 kmH, allowing it to increase its active assistance up to a speed of 50 KmH, exploiting the full potential of the excellent Fazua engine.

Vedi di più...
Clear

SKU N/A Category


Share

What is SpeedFun Furious?

SpeedFun FURIOUS is an electronic and intelligent speed release device that requires no external power supply.

It is designed to evade the speed block at 25 kmH, allowing it to increase its active assistance up to a speed of 50 KmH, exploiting the full potential of the excellent Fazua engine.

Speedup FURIOUS can be mounted very simply by interposing it between the speed sensor and the motor using original connectors that do not alter the characteristics of electrical resistance and water tightness.

Once the Furious device is installed, the bicycle tachograph will show half speed and relative data making it possible, by simply multiplying in mind by two, the calculation of the actual speed and kilometers traveled.

Furious for Fazua is available in only one version:

– Version EASY with connectors for all FAZUA engine: from the moment of installation the device is working, always active, it can not be deactivated.

Where should FURIOUS be positioned for Fazua?

  1. Above the gear-box, inside the cavity of the frame. This placement is more laborious because it requires the removal of the Fazua gear-box but makes the Furious device completely invisible and well protected.
  2. Close to the connector group. This placement is very simple but in some ebike models (for example Pinarello Nytro) it no longer allows the replacement of the original under-engine protection. A box is available (click here), specially created for the Fazua gear-box, which serves as a containment device and protection of the connector assembly for the e-bikes that do not have it. This box is sold separately

 

Ebike with Fazua engine where the FURIOUS device was successfully installed

(this list is exemplary and not exhaustive)

– Pinarello Nytro E-Road Bike
– Lombardo E-Mugello Road
– Cube Agree Hybrid C:62
– Whistle Flow
– Bianchi E-Doardo

– Fantic Passo Giau
– Focus Project Y
– Maserati MC Corse
– Atala E-Road Flow
– Bottecchia BE 90 Pulsar E-Road carbon

– Focus Raven 2
– Whistle E-Road Flow
– Cairn e-bike
– Focus Paralane² e-road
– Boardman ADV 8.9E Adventure Electric Bike

 

The main features

– Totally INVISIBLE

– It can be assembled/disassembled at any time

– It doesn’t need any destructive modification to the original parts of the bicycle thanks to the original connectors

– Allows you to reach speeds with active assistance even 50 kmH

– Installable in minutes, ready to use, plug and go!

– Suitable for all Fazua engines fitted in every ebike brand

– It does not need batteries or external power supply. 

 

Video Assembly Instructions

The following video illustrates the steps to mount your FURIOUS device.

SpeedFun Furious easy for Fazua with connector


This site uses cookies to enhance your experience. By continuing to the site you accept their use. More info in our cookies policy.     ACCEPT

ATTENTION, IMPORTANT NOTICE
Once the SpeedFun speed release device has been installed, the electric bicycle, being over the limit of 25 kmH, is equated to a moped and as such, if it circulates in public places, requires the homologation-registration by the Civil Motorization, it is subject to payment of road tax and insurance coverage, must have a license plate, cannot travel on cycle paths and the driver is obliged to drive with a license and must wear a helmet. Furthermore, driving a motor bike equivalent to a moped that does not comply with the aforementioned provisions involves the administrative seizure of the vehicle and fines that vary according to the infringement committed.
The manufacturer of the speed release system accepts no responsibility for any damage caused to the pedal assisted bicycles on which the device is mounted as well as to direct or indirect damage to people or things.
Please note that changing the bicycle invalidates the manufacturer’s warranty.

EBIKE SOFTWARE COMPATIBLE WITH SPEEDUP DEVICES
The operation of the SpeedFun devices is guaranteed for the software versions of the ebikes released up to the date of purchase of the device itself.
If the ebike is subsequently updated with software for which the SpeedFun device has not been tested, it may fail to work and SpeedFun does not respond with the guarantee.
Before updating your engine it is necessary to check the compatibility with your SpeedFun device.

ABOUT ANTI-TUNING DEFENSES:
SpeedFun – Phase B snc disclaims any responsibility for any anomalies or engine blocks caused by the anti-tuning defenses that the engine manufacturers could activate.

NB: All the brands mentioned on this site are named exclusively to identify the models of engines and bicycles on which our devices are compatible. They are the property of the respective owners and are in no way related to our company.

Use your helmet, save your life!

Contact