SpeedFun Furious Evo for Polini E-P3, E-P3+, EP-3+ MX and E-P3+ “evo” and E-P3+ MX “evo”
SpeedFun Furious Evo is an ebike tuning that allows you to remove the 25 kmH speed block by fully exploiting the potential of the Polini ebike motors.
This ebike tuning device is specially designed to unlock the speed of Polini E-P3, E-P3+, EP-3+ MX and for E-P3+ “evo” and E-P3+ MX “evo” motors mostly mounted on Avio Bike, Bad Bike, Bianchi, Bikel, Cicli Elios, CIOCC, Fabrik, FM Bike, Garelli, Handbike Garage, Jeep, Kawasaki, MDE Bikes, Mondial, Officine Mattio, Olmo, Pedroni Cycles, Stajvelo, Titici, WR Compositi and Guerciotti (Brera) and many more ebikes.
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time even without being connected to the motor light output.
Check connectors before buying!
Before buying SpeedFun tuning check the color of the speed sensor connectors. Between 2022 and 2023 Polini created two new engines: E-P3+ “evo” and E-P3+ MX “evo”. These new motors have different shape and color connectors than the previous ones. In order not to be mistaken, remember that:
White connectors = Polini E-P3, E-P3+, EP-3+ MX
Black connectors = E-P3+ “evo”, E-P3+ MX “evo”
What is Polini E-P3, E-P3+ e EP-3+ MX SpeedFun Furious Evo ebike tuning?
The function of the Furious Evo tuning device for Polini E-P3, E-P3+, EP-3+ MX and for E-P3+ “evo” and E-P3+ MX “evo” is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).
When the tuning device is active, having no communication with the display, it will show the halved data on the display starting from a certain threshold.
SpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed on ebike with Polini E-P3, E-P3+, EP-3+ MX and for E-P3+ “evo” and E-P3+ MX “evo” motors mostly installed on ebike Avio Bike, Bad Bike, Bianchi, Bikel, Cicli Elios, CIOCC, Fabrik, FM Bike, Garelli, Handbike Garage, Jeep, Kawasaki, MDE Bikes, Mondial, Officine Mattio, Olmo, Pedroni Cycles, Stajvelo, Titici, WR Compositi, Guerciotti (Brera) and many more regardless of the type of display or side control of the ebike.
The Furiosu Evo tuning device for Polini can be activated/deactivated by simply pressing the ebike’s light button. If the ebike already has the lights connected to the light output, or if it is not possible to use it, it will still be possible to activate/deactivate the tuning with a very practical system (for more information see the instructions here). The device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.
Ebike with Polini motor where the Furious Evo device was successfully installed
(this list is illustrative and not exhaustive)
– Guerciotti Brera I.ON
– Bad Bike evo Polini
– Bianchi Impulso e-Road
– Bikel Urban+
– Ciocc XC-Hero 27.5
– Pedroni E-Pard Team Replica
– Olmo E-bro
Additional information
Installation | Internal (totally invisible from the outside) |
---|---|
Dimensions | 31 x 16,5 x 7,5 mm |
Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
Assistance | Over 60 km/h |
Compatible motor | Polini E-P3, E-P3+, EP-3+ MX |
Compatible displays | Any display and handlebar control |
Data displayed (on display or app) | Altered (halved above a certain threshold) |
Device power | No external power supply required |