SpeedFun Furious Evo easy+ for Dapu MD250S

122,73

SpeedFun Furious Evo is an ebike tuning that allows you to remove the 25 kmH speed block by fully exploiting the potential of the Dapu md250 engine.

This speed release, specially designed for ebikes with Dapu MD250S motors mostly mounted on Cortina, Ekletta and many other ebikes, allows you to increase their active assistance up to speeds that can reach 60 Km/h.

All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time and without the need for connections to the light output.


SKU FU_EVO_EA_DAPU_MD250S Categories ,


Share

What is SpeedFun Furious Evo ebike tuning for Dapu MD250S?

The function of the Furious Evo tuning device for Dapu MD250S is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).

When the tuning device is active, having no communication with the display, it will show the halved data on the display starting from a certain threshold.

SpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. Compatible with Dapu MD250S motor mainly used by Cortina, Ekletta and many other.

The Furiosu Evo for Dapu MD250S tuning device can be activated/deactivated in a very practical system (for more information see the instructions). The device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.

Caution
This device is compatible only and exclusively with ebikes equipped with a Dapu MD250S motor. Check the connectors before buying, if they don’t match the ones in the photo you probably have a Dapu MD250. You can find the correct product HERE.

 

Ebike with Dapu MD250S motor where the Furious Evo device was successfully installed

(this list is illustrative and not exhaustive)

– Ekletta Bumpy
– Rock Machine e-bike storm E70 29″
– Rock Machine e-bike Storm INT e90-29 Touring

Additional information
Dimensions

31 x 16,5 x 7,5 mm

Connections

Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring)

Assistance

Over 60 km/h

Compatible motor

Dapu MD250S

Compatible displays

Any display and handlebar control

Data displayed (on display or app)

Altered (variables above a certain threshold)

Device power

No external power supply required

Reviews

There are no reviews yet.

Be the first to review “SpeedFun Furious Evo easy+ for Dapu MD250S”

ATTENTION, IMPORTANT NOTICE

Once the SpeedFun speed release device has been installed, the electric bicycle, exceeding the limit of 25 kmH, is treated as a moped and as such, if circulating in public places, requires approval-registration by the Civil Motorization, it is subject to payment of road tax and insurance coverage, must have a license plate, cannot circulate on cycle paths and the driver is required to have a driving license and must use a helmet. Furthermore, driving a motor bicycle equivalent to a moped that does not comply with the aforementioned provisions will result in the administrative seizure of the vehicle and pecuniary penalties which vary according to the infringement committed. The manufacturer of the speed release system declines all responsibility relating to any damage caused to pedal assisted bicycles on which the device is mounted as well as direct or indirect damage to people or things.
SpeedFun – Phase B snc declines all responsibility for any anomalies caused by the anti-tuning defenses that the engine manufacturers could activate.
Please note that modifying your bicycle could invalidate the manufacturer’s warranty.

SOFTWARE COMPATIBLE WITH SPEEDFUN DEVICES
The functioning of the SpeedFun devices is guaranteed for the software versions of the ebikes released up to the date of purchase of the device itself.
If the ebike is subsequently updated with software for which the SpeedFun device was not designed, it may not work.
Before upgrading your engine you need to check compatibility with your SpeedFun device.

NB: All the brands mentioned on this site are mentioned only and exclusively to identify the models of motors and bicycles on which our devices are compatible. This brand are the property of their respective owners and are in no way related to our company.

Use your helmet, save your life!


CONTACTS

Speedfun by Phase B s.n.c.
via L. da Vinci, 13
35020 Casalserugo (PD)
C.F./P.IVA IT05173510289

SOCIAL

Privacy Preference Center