SpeedFun Furious Evo on/off lights for Bafang M510
SpeedFun Furious Evo is an ebike tuning that allows you to remove the 25 kmH speed block by fully exploiting the potential of the Bafang M510 motor.
This speed release kit is designed for Bafang M510 motors mostly mounted on Accolmile, Eskute, MTF, Alpek, Giama e-bikes and many others, regardless of the display or the handlebar control.
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time even without the need for connections to the light output.
What is SpeedFun Furious Evo for Bafang M510?
The function of the Furious Evo tuning device for Bafang M510 is to electronically manipulate the rotation speed of the rear wheel and to communicate to the engine a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).
It can be installed on ebikes with Bafang 510 motors mounted mostly on Accolmile and Eskute ebikes regardless of the type of display or side control of the ebike.
The Furious Evo tuning device for Bafang M510 can be activated/deactivated by simply pressing the ebike light button. If the ebike already has lights connected to the light output, or if it is not possible to use it, it will still be possible to activate/deactivate tuning with a very practical system (for further information, consult the instructions).
When the tuning device is active, not having communication with the display, it will show the halved data on the display starting from a certain threshold.
The kit is supplied plug and go ready to use and can be installed very simply thanks to the original connectors with which no physical modification of the ebike is necessary.
ATTENTION!
This device is not compatible with Enviolo automatic transmission (Enviolo AUTOMATiQ)
Attention!
This device is not compatible with Enviolo automatic transmission (Enviolo AUTOMATiQ)
Ebike with Bafang M510 motor where the Furious Evo device was successfully installed
(this list is illustrative and not exhaustive)
– Alpek Evoke Pro 2020
– Alpek Runa e Runa Ultimate
– Agazzini Bikes New Enduro
– Eskute Netuno
Additional information
| Installation |
Internal (totally invisible from the outside) |
|---|---|
| Dimensions |
37 x 22 x 7,5 mm |
| Connections |
Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
| Assistance |
Over 60 km/h |
| Compatible motor |
Bafang M510 |
| Compatible displays |
Any display and handlebar control |
| Data displayed (on display or app) |
Altered (halved above a certain threshold) |
| Device power |
No external power supply required |
Be the first to review “SpeedFun Furious Evo on/off lights for Bafang M510”
Installation and use instructions
Installation instructions and connections diagram Furious Evo for Bafang M510
Related products
Reviews
There are no reviews yet.