SpeedFun Furious Evo on/off lights for Yamaha PW-X3 and PW-S2
SpeedFun Furious Evo is a tuning for Haibike ebike with Yamaha PW-X3 and PW-S2 motor that allows you to remove the 25 km/h speed block by fully exploiting the motor’s potential.
This speed release device is specially designed for Yamaha PW-X3 and PW-S2 motor used by Haibike on the NDuro, AllMnt and Adventr FS models.
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time and without the need for connections to the light output.
Out of stock
What is SpeedFun Furious Evo tuning for Yamaha PW-X3 and PW-S2?
The function of the Furious Evo tuning device for Yamaha PW-X3 and PW-S2 is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed that is always lower than 25 KmH in order to obtain a very high real speed with the engine active. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).
When the tuning device is active, since it has no communication with the display, it will show halved data on the display starting from a certain threshold.
It can be installed on ebikes with Yamaha PW-X3 and PW-S2 motor mostly installed on Haibike Nduro, AllMtn, Adventr FS and many others, regardless of the type of display or side control of the ebike.
The Furiosu Evo tuning device for Yamaha PW-X3 and PW-S2 ebikes can be activated/deactivated by simply pressing the ebike light button. If the ebike already has the lights connected to the light output, or if it is not possible to use it, it will still be possible to activate/deactivate the tuning with a very practical system (for more information, consult the instructions). The device is supplied plug and go ready to use it is very simple to install thanks to the original connectors with which no physical modification of the ebike is required.
ATTENTION!
This device is not compatible with Yamaha brand ebikes (e.g. Yamaha Moro, CrossCore, Booster, Wabash etc.)
Ebike with Yamaha PW-X3 and PW-S2 motor where the Furious Evo device has been successfully installed
(this list is exemplary and not exhaustive)
– Haibike NDuro 8 Freeride
– Haibike Nduro 7
– Haibike Nduro 6
– Haibike AllMtn 10
– Haibike AllMtn 7
– Haibike AllMtn 4
– Haibike AllMtn 2
– Haibike ADVENTR FS 10
Additional information
| Installation | Internal (totally invisible from the outside) |
|---|---|
| Dimensions | 31 x 16,5 x 7,5 mm |
| Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
| Assistance | Over 60 km/h |
| Compatible motor | Yamaha PW-S2, Yamaha PW-X3 |
| Compatible displays | Any display and handlebar control |
| Data displayed (on display or app) | Altered (halved above a certain threshold) |
| Device power | No external power supply required |
Be the first to review “SpeedFun Furious Evo on/off lights for Yamaha PW-X3 and PW-S2”
Assembly and use instructions
Instructions for assembly and use of the Furious Evo on/off lights for Yamaha PW-X3
Related products
Reviews
There are no reviews yet.