Container lid for Fazua
This cover has been specially designed by SpeedFun to obtain a container for the Furious release device and, at the same time, to protect against splashes of water caused by the rotation of the wheel in the “connectors” area of the Fazua gear-box.
Due to the very little space available, this special cover was created which, thanks to its shape, will facilitate the installation of any release device, giving you more space and avoiding having to lower the motor to insert the device into the frame.
Cover compatible only and exclusively with Fazua Ride 50 motor.
What is the container lid for Fazua Ride 50?
The container lid for Fazua Ride 50 has been specially designed by SpeedFun to obtain a container for the Furious release device and, at the same time, to protect against water splashes caused by the rotation of the wheel in the “connectors” area of the Fazua gear-box. Some ebikes are completely unprotected and in this case the cover is very useful. Some ebikes, for example Pinarello Nytro, are provided with a crankcase that unfortunately must be removed if you want to place the device in the convenient front-connectors area.
The Furious device could also be placed above the gear-box, inside the cavities of the frame, but this operation requires a little ‘more dexterity to remove the gear-box itself. In this case the container lid is not indispensable.
The container lid is available separately and is not supplied with the device.
The container lid is made of PLA printed with 3D printer and must be fixed with the two supplied screws replacing the existing screws of the gear-box. Due to the nature of the object and how it is produced, we can not guarantee perfect execution and aesthetic finish.
We have also created a specific version of container lid for Pinarello Nytro that includes a PLA corner that has only aesthetic functions of filling a surface that the particular frame of the Nytro would otherwise leave empty.
This new cover, compared to the previous version, is still printed in PLA (100% recyclable and eco friendly) but with a greater filling and a very reduced layer height so as to guarantee greater resistance and an extremely pleasant finish.
A seat has been added inside to place the SpeedFun Furious evo tuning for Fazua so as to further facilitate installation. In fact, it will be enough to place the tuning in the seat until you hear a “click” and close the cover by fixing it with the appropriate screws.
Ebike with Fazua Ride 50 motor where the container cover has been successfully installed
(this list is exemplary and not exhaustive)
– Pinarello Nytro E-Road Bike
– Lombardo E-Mugello Road
– Cube Agree Hybrid C:62
– Whistle Flow
– Bianchi E-Doardo
– Fantic Passo Giau
– Focus Project Y
– Maserati MC Corse
– Focus Raven 2
– Focus Raven 2
– Whistle E-Road Flow
– Focus Paralane² e-road
– Boardman ADV 8.9E Adventure Electric Bike
Additional information
| Colore | Black |
|---|---|
| Compatible motor | Fazua Evation (Ride 50) |
| Dimensions | 62 x 68 x 24 mm |
Assembly and use instructions
Video assembly instructions
