SpeedFun Furious Evo for Yamaha
SpeedFun Furious Evo is an ebike tuning that allows you to remove the 25 kmH speed block by fully exploiting the potential of the Yamaha motors.
This ebike tuning device is specially designed to unlock the speed of Yamaha PW-X, PW-X2, PW-SE, PW-TE e PW-ST motors mostly mounted on Haibike, Yamaha, Ghost, Lapierre, MBK, Winora, Gitane, Bixs and many more ebikes.
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time even without being connected to the motor light output.
What is Yamaha SpeedFun Furious Evo ebike tuning?
The function of the Furious Evo tuning device for Yamaha is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).
When the tuning device is active, having no communication with the display, it will show the halved data on the display starting from a certain threshold.
SpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed on ebike with Yamaha PW-X, PW-X2, PW-SE, PW-TE e PW-ST motors mostly installed on ebike Ghost, Lapierre, MBK, Winora, Gitane, Bixs and many more regardless of the type of display or side control of the ebike.
The Furiosu Evo tuning device for Yamaha can be activated/deactivated by simply pressing the ebike’s light button. If the ebike already has the lights connected to the light output, or if it is not possible to use it, it will still be possible to activate/deactivate the tuning with a very practical system (for more information see the instructions here). The device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.
Ebike with Yamaha engine where the Furious Evo device was successfully installed
(this list is illustrative and not exhaustive)
– Haibike Xduro Nduro 8.0
– Haibike Xduro Nduro 5.0
– Haibike Xduro Nduro 10.0
– Haibike Xduro Alltrail 6.0
– Haibike Xduro Alltrail 5.0
– Haibike Xduro Allmtn 8.0
– Haibike Xduro Allmtn 5.0
– Haibike Xduro Allmtn 10.0
– Haibike Nduro 7
– Haibike Hardseven 10, 9, 8, ecc
– Haibike Hardnine 10, 9, 8, ecc
– Haibike Fullseven 9, 8, 7, ecc
– Haibike Fullnine 10, 9, 8, 7, ecc
– Haibike Dwnhll
– Haibike Allmtn se e Allmtn cf se
– Haibike Allmtn 7, 6, 5, ecc
– Haibike Xduro Adventr FS
– Haibike Xduro Adventr 6.0 e Xduro Adventr 5.0
– Haibike Trekking 9, Trekking 9 Lowstep e Trekking 9 Lowstandover
– Haibike Trekking 8, Trekking 8 Lowstandover
– Haibike Trekking 7, Trekking 7 Lowstep e Trekking 7 Lowstandover
– Haibike Trekking 6, Trekking 6 Lowstep e Trekking 6 Lowstandover
The main features
– Totally invisible
– It can be assembled/disassembled at any time
– Equipped with original connectors that do not require any physical modification to the ebike wiring
– Allows you to remove the limit of 25 KmH up to speed without limits (info)
– Can be installed in minutes, ready to use, plug and go!
– Suitable for Yamaha PW-X, PW-X2, PW-SE, PW-TE and PW-ST engines
– Compatible with any type of display or command
– The device can be activated/deactivated by pressing the lights button. If the light output is busy, it can still be activated/deactivated in a very practical way (more info here)
– Does not need external batteries or power supply.
Assembly and Use Instructions
Instructions for use and connection diagram Furious Evo for Yamaha
Video Assembly Instructions
How to install SpeedFun Furious tuning ebike speed release kit with Yamaha PW motor
Additional information
Assistance: | Increase assistance up to over 60 km/h |
---|---|
Display data: | Shows real data up to 20 km/h. Beyond 20 Km/h the data are distorted on the display or on the app |
Motor compatibility: | Compatible with Yamaha PW-X, PW-X2, PW-SE, PW-TE and PW-ST motors |
Activation/Deactivation: | Activation and deactivation of the device with the lights button or idle pedaling (for more information see instructions) |
Dimensions: | The device measures 31 x 16.5 x 7 mm |