SpeedFun Furious Ultra for Oli Edge 2.0 motor

What is the SpeedFun Furious Ultra e-bike tuning kit for Oli Edge 2.0 motors?

LThe function of the Furious Ultra tuning device for Oli Edge 2.0 motors  is to electronically manipulate the rear wheel’s rotational speed and to signal a speed to the motor that is always below 25 km/h, thereby achieving a very high actual speed whilst the motor is active. The maximum speed limit will therefore be determined by the motor’s power combined with the power generated by your own legs (info).

When the tuning device is active, as it has no communication with the display, it will show halved data on any display (or app) from a certain threshold onwards.

This tuning kit is compatible with all e-bikes equipped with an Oli Edge 2.0 motor, regardless of the type of display or side control on the e-bike.
On Furious Evo Ultra devices, you can choose the operating mode:

• Always active, cannot be deactivated
• Can be activated/deactivated by pedalling with the wheel off the ground
• If the tuning is active before switching off, it will remain active after switching on again
• If the tuning is active before switching off, it will be deactivated after switching on again
• The tuning can be activated/deactivated using an external button (not supplied in the kit)

For further information, please refer to the instructions

The device comes ready to use out of the box. It is very easy to install thanks to the original connectors, which mean no physical modifications to the e-bike are required.

WARNING!

This device is not compatible with e-bikes fitted with Oli Edge 1.0 and Oli Move/Sport/Sport Plus motors.

E-bikes with Oli Edge 2.0 motors on which the Furious Ultra device has been successfully installed

(this list is illustrative and not exhaustive)

Installation instructions and user manuals