SpeedFun Furious Evo easy+ for Bosch Smart System
SpeedFun Furious Evo easy + is a tuning for ebike equipped with a Bosch Smart System motor that allows you to remove the 25 km/h speed block.
This speed release device is specially designed for Bosch Smart System motors from 2022 used mostly by Cube, Focus, Riese & Muller, Haibike, Ghost, Bulls and many others, regardless of the display or the handlebar control.
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time and connection to the light output is not necessary.
What is SpeedFun Furious Evo tuning for Bosch Smart System?
The function of the Furious Evo tuning device for Bosch Smart System is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with a very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).
This speed release device is compatible with Bosch Smart System (Active Line, Active Line Plus, Performance Line, Performance Line CX, Performance Line CX Race Limited Edition) motors from 2022 equipped with CompactTube 400, PowerTube 500,PowerTube 625, PowerTube 750 and LED Remote control (also compatible with e-bikes equipped with LED Remote + Kiox 300 control or Intuvia 100).
When the device is active, the display will show the exact speed up to the threshold of about 20 KmH, beyond which a manipulated speed will always be shown below 25 KmH.
SpeedFun Furious Evo is supplied ready to use, plug and go, can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed easily thanks to the compatible connectors.
ATTENTION!
This device is not compatible with e-bikes equipped with a magnet attached to the valve (Bosch Rim Magnet).
Ebike with Bosch Smart System motor where the Furious Evo easy + device has been successfully installed
(this list is illustrative and not exhaustive)
– Cube Stereo Hybrid 120 SL
– Cube Stereo Hybrid 120 SL
– Cube Stereo Hybrid ALLROAD
– Cube Stereo Hybrid 120 SLT
– Cube Stereo Hybrid 120 TM
– Cube Stereo Hybrid 120 RACE
– Cube Stereo Hybrid 120 PRO
– Cube Stereo Hybrid 140 HPC
– Cube Stereo Hybrid 140 HPC TM
– Cube Stereo Hybrid 140 HPC SL
– Cube Stereo Hybrid 140 HPC ACTIONTEAM
– Cube Stereo Hybrid 140 HPC RACE
– Cube Stereo Hybrid 140 HPC PRO
– Cube Stereo Hybrid 160 HPC
– Cube Stereo Hybrid 160 HPC TM
– Cube Stereo Hybrid 160 HPC SL
– Cube Stereo Hybrid 160 HPC ACTIONTEAM
– Cube Stereo Hybrid 160 HPC RACE
– Focus Thron2 6.9
– Focus Thron2 6.8
– Focus Thron2 6.8 EQP
– Focus Jarifa2 6.9
– Focus Jarifa2 6.8
– Haibike AllMtn CF SE
– Ghost E-Riot AM Full Party
– Bulls Copperhead Evo AM 3 750
Additional information
Dimensions | 31 x 16,5 x 7,5 mm |
---|---|
Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
Assistance | Over 60 km/h |
Compatible motor | Bosch Gen. 4 Smart System (Cargo Line, Active Line, Active Line Plus, Performance Line, Performance Line CX, Performance Line CX Race Limited Edition from 2022 onwards) |
Compatible speed sensor type | Classic speed sensor with spoke or disc magnet (not compatible with Bosch Rim Magnet) |
Compatible displays | Bosch LED Remote, Bosch Kiox 300, Bosch Intuvia 100 |
Data displayed (on display or app) | Altered (variables above a certain threshold) |
Device power | No external power supply required |
Show reviews in all languages (4)
Be the first to review “SpeedFun Furious Evo easy+ for Bosch Smart System”
Assembly and use instructions
Instructions for installation and use of Furious Evo for Bosch Smart System
Reviews
There are no reviews yet.