SpeedFun Furious Evo for Shimano Ep8 (EP800)

188,00

SpeedFun Furious Evo is a tuning for ebike with Shimano motor that allows you to remove the 25 kmH speed block by fully exploiting the potential of the Shimano Ep8 (EP800) motor.

This release device is specially designed for Shimano Ep8 (EP800) motor with mechanical derailleur (no DI2).

All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time even without connecting to the light output.


SKU FU_EVO_SHI_EP8 Categories ,


Share

What is the tuning for Shimano Ep8 (EP800) SpeedFun Furious Evo?

The function of the Furious Evo for Shimano Ep8 (EP800) tuning device is to electronically manipulate the rotation speed of the rear wheel and to communicate to the engine a speed always lower than 25 KmH, this allows to obtain a real speed with a very high active engine. The maximum speed limit is given by the power of the engine added to the power expressed by one’s legs (info).

When the device is active, the display will show the exact speed up to about 20 KmH approx, beyond which a manipulated speed will always be shown below 25 KmH.

SpeedFun Furious Evo can be activated and deactivated and maintains the setting even after the ebike is turned off. It can be installed on e-bikes with any type of display or side control as well as on e-bikes without a display or that mount the EW-EN100 wireless module.

The new technology of this tuning module for Shimano does not require the activation of the engine light output or interventions with diagnostics or apps. It is supplied plug and go ready to use and installs in a very simple way thanks to the connectors with which no physical modification of the ebike is necessary.

PLEASE NOTE: This tuning is not compatible with ebikes equipped with Shimano Di2 electronic derailleur.

 

ATTENTION 1
This tuning is not compatible with ebikes equipped with Shimano Di2 electronic derailleur.
ATTENTION 2
This tuning is not compatible only and exclusively with Shimano EP800 motors (not compatible with EP801 and EP600).

Additional information
Installation

Internal (totally invisible from the outside)

Dimensions

31 x 16,5 x 7,5 mm

Connections

Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring)

Assistance

Over 60 km/h

Compatible motor

Shimano EP800

Compatible displays

Any display and handlebar control

Data displayed (on display or app)

Altered (variables above a certain threshold)

Device power

No external power supply required

ATTENTION, IMPORTANT NOTICE

Once the SpeedFun speed release device has been installed, the electric bicycle, exceeding the limit of 25 kmH, is treated as a moped and as such, if circulating in public places, requires approval-registration by the Civil Motorization, it is subject to payment of road tax and insurance coverage, must have a license plate, cannot circulate on cycle paths and the driver is required to have a driving license and must use a helmet. Furthermore, driving a motor bicycle equivalent to a moped that does not comply with the aforementioned provisions will result in the administrative seizure of the vehicle and pecuniary penalties which vary according to the infringement committed. The manufacturer of the speed release system declines all responsibility relating to any damage caused to pedal assisted bicycles on which the device is mounted as well as direct or indirect damage to people or things.
SpeedFun – Phase B snc declines all responsibility for any anomalies caused by the anti-tuning defenses that the engine manufacturers could activate.
Please note that modifying your bicycle could invalidate the manufacturer’s warranty.

SOFTWARE COMPATIBLE WITH SPEEDFUN DEVICES
The functioning of the SpeedFun devices is guaranteed for the software versions of the ebikes released up to the date of purchase of the device itself.
If the ebike is subsequently updated with software for which the SpeedFun device was not designed, it may not work.
Before upgrading your engine you need to check compatibility with your SpeedFun device.

NB: All the brands mentioned on this site are mentioned only and exclusively to identify the models of motors and bicycles on which our devices are compatible. This brand are the property of their respective owners and are in no way related to our company.

Use your helmet, save your life!


CONTACTS

Speedfun by Phase B s.n.c.
via L. da Vinci, 13
35020 Casalserugo (PD)
C.F./P.IVA IT05173510289

SOCIAL

Privacy Preference Center