SpeedFun Furious Evo for Shimano Steps E8000 E7000 and…
SpeedFun Furious Evo is a tuning for ebike with Shimano motor that allows you to remove the 25 kmH speed block by fully exploiting the potential of the Shimano Steps engine.
This release device is specially designed for Shimano Steps E5000 E6000 E6001 E6002 E6010 E6012 E6050 E6100 E7000 E8000 and E8080 motors with mechanical derailleur (no DI2).
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time and without needing to be connected to the light output.
What is Shimano SpeedFun Furious Evo tuning?
The function of the Furious Evo tuning device is to electronically manipulate the rotation speed of the rear wheel and to communicate to the engine a speed that is always lower than 25 KmH in order to obtain a very high real speed with the engine active. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).
When the device is active, the display will show the exact speed up to the threshold of approximately 20 KmH, beyond which a manipulated speed will always be shown below 25 KmH.
SpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is switched off. It can be installed on ebikes with any type of display or side control as well as on ebikes without a display or that mount the EW-EN100 wireless module.
The new technology of this tuning module for Shimano does not require the activation of the engine light output or interventions with diagnostics or apps. It is supplied plug and go ready to use it is very simple to install thanks to the connectors with which no physical modification of the ebike is required.
PLEASE NOTE: This tuning is not compatible with ebikes equipped with Shimano Di2 electronic derailleur.
Additional information
| Installation | Internal (totally invisible from the outside) |
|---|---|
| Dimensions | 31 x 16,5 x 7,5 mm |
| Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
| Assistance | Over 60 km/h |
| Compatible motor | Shimano Steps E5000 E6000 E6001 E6002 E6010 E6012 E6050 E6100 E7000 E8000 E8080 |
| Compatible displays | Any display and handlebar control |
| Data displayed (on display or app) | Altered (variables above a certain threshold) |
| Device power | No external power supply required |
Video assembly instructions
Related products
