SpeedFun Furious Evo easy+ for Bewo

108,82VAT incl.

SpeedFun Furious Evo is a tuning for ebike that allows you to remove the 25 kmH speed block by taking full advantage of the motor’s potential.

This tuning is specially designed for Bewo engines mostly mounted on Torpado ebikes. This tuning allows you to increase the active assistance up to speeds that can reach 60 KmH by fully exploiting the potential of the engine.

All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time and without the need for connections to the light output.

Vedi di più...


SKU FU_EVO_EA_BEWO Category


Share

What is SpeedFun Furious Evo ebike tuning for Bewo?

The function of the Furious Evo tuning device for Bewo – Torpado is to electronically manipulate the rotation speed of the rear wheel and to communicate to the engine a speed always lower than 25 KmH in order to obtain a real speed with very high active engine. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).

When the device is active, the display will show the exact speed up to about 20 KmH approx, beyond which a manipulated speed will always be shown below 25 KmH.

SpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed on ebike with Bewo engine mostly mounted on Torpado ebike regardless of the type of display or side control of the ebike.

The Furiosu Evo tuning device for Bewo can be activated/deactivated with a very practical system (for more information see the instructions). The device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.

 

The main features

– Totally invisible

– It can be assembled/disassembled at any time

– Equipped with original connectors that do not require any physical modification to the ebike wiring

– Allows you to remove the 25 KmH limit up to speed without limits (info)

– Can be installed in minutes, ready to use, plug and go!

– Suitable for Bewo engines mostly mounted on Torpado

– Compatible with any type of display or command

– It is possible to activate/deactivate in a very practical way (more info in the instructions)

– Does not need external batteries or power supply.

 

Assembly and use instructions

Use and assembly instruction for Furious Evo for Bewo


Reviews

There are no reviews yet.

Be the first to review “SpeedFun Furious Evo easy+ for Bewo”

This site uses cookies to enhance your experience. By continuing to the site you accept their use. More info in our cookies policy.     ACCEPT

ATTENTION, IMPORTANT NOTICE
Once the SpeedFun speed release device has been installed, the electric bicycle, if exceeding the limit of 25 kmH, is equated to a moped and as such, if traveling in public places, it needs to be homologated-registered by the Civil Motorization. subject to the payment of the road tax and insurance coverage, must have a license plate, cannot circulate on cycle paths and the driver is obliged to drive with a license and must use a helmet. In addition, driving a motor bicycle equivalent to a moped that does not comply with the aforementioned provisions entails the administrative seizure of the vehicle and financial penalties that vary according to the infringement committed. The manufacturer of the speed release system declines all responsibility for any damage caused to pedal-assisted bicycles on which the device is mounted as well as direct or indirect damage to people or things.
SpeedFun – Phase B snc declines any responsibility for any anomalies caused by the anti-tuning defenses that the engine manufacturers could activate.
Remember that the modification to the bicycle could invalidate the manufacturer’s warranty.

EBIKE SOFTWARE COMPATIBLE WITH SPEEDFUN DEVICES
The operation of the SpeedFun devices is guaranteed for the software versions of the ebikes released up to the date of purchase of the device itself.
If the ebike is subsequently updated with software for which the SpeedFun device has not been designed, its failure may occur.
Before updating your engine, it is necessary to check the compatibility with your SpeedFun device.

NB: All the brands mentioned on this site are named exclusively to identify the models of engines and bicycles on which our devices are compatible. They are the property of the respective owners and are in no way related to our company.

Use your helmet, save your life!

Contact