SpeedFun Furious Evo for Ananda M60 M81 M100 M230
SpeedFun Furious Evo is an ebike tuning that allows you to remove the 25 kmH speed block by fully exploiting the potential of the Ananda motor.
It is designed for Ananda M60 M81 M100 M230 and Atala AM80 Agile (Gen. 2) motors mostly installed on Olympia e-bikes with the wording “tuned by Olympia” to circumvent the speed block at 25 kmH allowing to increase the active assistance up to speeds that can reach 50 KmH taking full advantage of the motor potential.
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time and without the need for connections to the light output.
What is SpeedFun Furious Evo Ananda M60 M81 M100 M230 and Atala AM80 Agile (Gen. 2) ebike tuning?
The function of the Furious Evo tuning device for Ananda M60 M81 M100 M230 and Atala AM80 Agile (Gen. 2) is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).
When the tuning device is active, having no communication with the display, it will show the halved data on the display starting from a certain threshold.
Speedup Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed on ebike with Ananda M60 M81 M100 M230 and Atala AM80 Agile (Gen. 2) motors mostly mounted on Olympia ebikes (in this case often with the words “Tuned by Olympia”) regardless of the type of display or side control of the ebike.
The Furious Evo tuning device for Ananda M60 M81 M100 M230 and Atala AM80 Agile (Gen. 2) can be activated/deactivated by simply pressing the ebike’s light button. If the ebike already has the lights connected to the light output, or if it is not possible to use it, it will still be possible to activate/deactivate the tuning with a very practical system (for more information see the instructions here). The device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.
Ebike with Ananda M60 M81 M100 M230 and Atala AM80 Agile (Gen. 2) motors where the Furious Evo device was successfully installed
(this list is illustrative and not exhaustive)
Ananda M100 tuned by Olympia
– Olympia EX 900 and EX 900 Prime
– Olympia Performer 900 and Performer 900 Prime
– Olympia Mistral 900 X and Mistral 900 GT
Ananda M81 tuned by Olympia (100Nm)
– Olympia EX 900 Trail
– Olympia Master 630 29″ or Master 630 26″
– Olympia Explorer 630
– Olympia Super Magnum man and Super Magnum comfort
Other ebike M60 M81 M100 M230
– Nakamura Crossover XV
– Puch E-Modern N7
Additional information
| Installation | Internal (totally invisible from the outside) |
|---|---|
| Dimensions | 31 x 16,5 x 7,5 mm |
| Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
| Assistance | Over 60 km/h |
| Compatible motor | Ananda M60 M81 M100 M230, Atala AM80 Agile (Gen. 2) |
| Compatible displays | Any display and handlebar control |
| Data displayed (on display or app) | Altered (halved above a certain threshold) |
| Device power | No external power supply required |
