SpeedFun Furious Evo for Bafang M500
SpeedFun Furious Evo is an ebike tuning that allows you to remove the 25 kmH speed block by fully exploiting the potential of the Bafang M500 motor.
It is designed Bafang M500 motor mostly installed on Fantic Issimo, Alpek and Leader Fox ebikes.
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time and without the need for connections to the light output.
What is SpeedFun Furious Evo ebike tuning for Bafang M500 on Fantic Issimo?
The function of the Furious Evo tuning device for Bafang M500 is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).
When the tuning device is active, having no communication with the display, it will show the halved data on the display starting from a certain threshold.
SpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed on ebike with Bafang M500 motors mostly mounted on Fantic Issimo, Alpek and Leader Fox ebikes regardless of the type of display or side control of the ebike.
The Furiosu Evo tuning device for Bafang M500 can be activated/deactivated by simply pressing the ebike’s light button. If the ebike already has the lights connected to the light output, or if it is not possible to use it, it will still be possible to activate/deactivate the tuning with a very practical system (for more information see the instructions here). The device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.
Ebike with Bafang M500 motor where the Furious Evo device was successfully installed
(this list is illustrative and not exhaustive)
– AEROTEC HE-1 CARBON HYBRID 29/27.5+ M500 TYPE 3
– AEROTEC HE-2 CARBON HYBRID 29″ M500 TYPE 3
– AEROTEC HE-2 CARBON HYBRID 29″ M500 TYPE 2 KILOWATT 1.2
– AEROTEC HE-2 CARBON HYBRID 29″ M500 TYPE 2
– AEROTEC HE-1 CARBON HYBRID 29/27.5+ M500 TYPE 2
– AEROTEC HE-1 CARBON HYBRID 29/27.5+ M500 TYPE 1
– AEROTEC HE-2 CARBON HYBRID 29″ M500 TYPE 1
– AEROTEC HE-2 CARBON HYBRID 29″ M500 TYPE 1 KILOWATT 1.2
– Fantic Issimo
– Alpek Evoke PRO
– Leader Fox BRAGA
– Leader Fox Altar
Additional information
Installation | Internal (totally invisible from the outside) |
---|---|
Dimensions | 37 x 22 x 7,5 mm |
Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
Assistance | Over 60 km/h |
Compatible motor | Bafang M500 |
Compatible displays | Any display and handlebar control |
Data displayed (on display or app) | Altered (halved above a certain threshold) |
Device power | No external power supply required |