SpeedFun Furious Evo easy+ for Dapu MD250
SpeedFun Furious Evo easy+ is a tuning for ebike that allows you to remove the 25 kmH speed block by fully exploiting the potential of the Dapu MD250 motor.
This tuning is specially designed for Dapu MD250 motor mostly mounted on BH Bikes (BH Drive-1E 36V, BH 1E, BH 2E, BH 2ESMAG), Megamo (Megamo Central Motor, Central Motor DP, Megamo mid motor) and many others, allows you to increase the active assistance up to speeds that can reach 60 KmH.
All SpeedFun Furious Evo easy+ speed release devices can be activated and deactivated at any time even without connecting to the light output.
What is SpeedFun Furious Evo easy+ ebike tuning for Dapu MD250?
The function of the Furious Evo easy+ tuning device for Dapu MD250 (BH Drive-1E 36V, BH 1E, BH 2E, BH 2ESMAG, Megamo Central Motor, Central Motor DP, Megamo mid motor) is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).
When the tuning device is active, having no communication with the display, it will show the halved data on the display starting from a certain threshold.
SpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. Compatible with Dapu MD250 motor mainly used by the following ebike manufacturers:
- – BH Bikes with the names “BH Drive-1E 36V“, “BH Core“, “BH 1E“, “BH 2E” and “BH 2ESMAG“
- – Megamo with the names of “Megamo Central Motor“, “Megamo Central Motor DP” and “Megamo Mid Motor“
The Furiosu Evo easy+ tuning device can be activated/deactivated in a very practical system (for more information see the instructions). The device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.
Attention 1
This device is compatible only and exclusively with ebikes equipped with a Dapu MD250 motor. Check the connectors before buying, if they don’t match the ones in the photo you probably have a Dapu MD250S. You can find the correct product HERE.
Attention 2
This device is not compatible with BH ebikes equipped with 2EXMAG motors. For ebikes that mount this engine, the appropriate tuning is available HERE.
Ebike with Dapu MD250 motor where the Furious Evo easy+ device was successfully installed
(this list is illustrative and not exhaustive)
– BH Atom
– BH Lynx e BH iLynx
– BH Atom Cross
– BH Core
– Megamo Ridon FS
– Megamo Ridon 04
– Megamo Ridon 10
Additional information
Installation | Internal (totally invisible from the outside) |
---|---|
Dimensions | 38 x 16,5 x 7,5 mm |
Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
Assistance | Over 60 km/h |
Compatible motor | Dapu MD250 |
Compatible displays | Any display and handlebar control |
Data displayed (on display or app) | Altered (halved above a certain threshold) |
Device power | No external power supply required |