SpeedFun Ribelle for Yamaha PW-X3 and PW-S2
SpeedFun Ribelle is a tuning kit for ebikes with a Yamaha PW-X3 and PW-S2 motor that allows you to remove the speed block at 25 kmH and increase the active assistance up to speeds that can exceed 60 kmH, fully exploiting the potential of the motor.
This speed release device is compatible with Yamaha PW-X3 and PW-S2 motor and Yamaha display A “sideswitch”, Yamaha display C “multi–switch” and Yamaha Interface X used on Ghost, Haibike, Lapierre, MBK, Winora, Gitane, Bixs, Fantic and many more.
The Ribelle tuning device for Yamaha PW-X3 and PW-S2 motors shows all real data on the display.
What is SpeedFun Ribelle tuning kit for Yamaha PW-X3?
SpeedFun Ribelle is a tuning for ebikes equipped with a Yamaha PW-X3 and PW-S2 motor that allows you to increase the speed of the ebike by removing the block set at 25 kmH. With SpeedFun Ribelle, active assistance is increased up to speeds that can exceed 60 kmH (info), making full use of the motor’s potential.
This speed release device is compatible with Yamaha PW-X3 and PW-S2 motor with Yamaha display A “sideswitch”, Yamaha display C “multi-switch” and Yamaha Interface X used on Ghost, Haibike, Lapierre, MBK, Winora, Gitane, Bixs, Fantic and many more ebikes.
The Ribelle tuning device for Yamaha PW-X3 and PW-S2 ebikes shows all real data on the display/app. It can be activated or deactivated by pressing a simple sequence of keys and the activation/deactivation of the device is indicated on the display. This tuning is equipped with original connectors for quick and easy installation.
ATTENTION!
This device is not compatible with Yamaha brand ebikes (e.g. Yamaha Moro, CrossCore, Booster, Wabash etc.)
Ebike with Yamaha PW-X3 and Pw-S2 motor where the Ribelle device has been successfully installed
(this list is illustrative and not exhaustive)
– Haibike NDURO 8 Freeride
– Haibike NDURO 7
– Haibike NDURO 6
– Haibike AllMtn 10
– Haibike AllMtn 7
– Haibike AllMtn 4
– Haibike AllMtn 2
– Haibike ADVENTR FS 10
– Fantic XTF 1.5 Sport
– Raymon TrailRay 140E 10.0
– Raymon TrailRay 160E 9.0
Additional information
Installation | Internal (totally invisible from the outside) |
---|---|
Dimensions | 37 x 22 x 7,5 mm |
Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
Assistance | Up to 60 km/h approx. |
Compatible motor | Yamaha PW-S2, Yamaha PW-X3 |
Compatible displays | Yamaha display A “sideswitch”, Yamaha display C “multi–switch”, Yamaha Interface X |
Data displayed (on display or app) | All real data |
Device power | No external power supply required |
Be the first to review “SpeedFun Ribelle for Yamaha PW-X3 and PW-S2”
Installation and use instructions
Instructions for use and connection diagram Ribelle for Yamaha PW-X3
Reviews
There are no reviews yet.