SpeedFun Ribelle for Bosch

132,00€ – 152,50VAT incl.

SpeedFun Ribelle is a ebike tuning for Bosch engine that allows you to remove the speed block at 25 kmH and increase its active assistance up to 60 KmH.

This unlocking device is compatible with Bosch gen.2, gen.3 and  gen.4 engines (including Performance CX 2020 and 2021) and with Intuvia, Purion, Nyon (including new Nyon 2021) and Kiox displays.

SpeedFun Ribelle for Bosch e-bikes always shows real data on the display.

Vedi di più...
Clear


SKU N/A Category


Share

What is the Bosch SpeedFun Ribelle ebike tuning?

SpeedFun Ribelle is a ebike tuning for Bosch engine that allows you to increase the speed of the ebike by removing the block set at 25 kmH. With SpeedFun Ribelle, active assistance is increased up to 60 km/h (info).

This device is compatible with Intuvia, Purion, Nyon (including new Nyon 2021) and Kiox displays and can be installed on Bosch Gen. 2 (Active, Performance and Performance CX 2014, 2015, 2016, 2017, 2018, 2019 and 2020), Gen. 3 (Active Line, Active Line Plus 2018, 2019 and 2020) and Gen. 4 (Performance CX and Performance Line 2020 and 2021).

SpeedFun Ribelle is a very small device, measuring only 38 x 16.5 x 7.5 mm. It is equipped with original connectors and does not change the characteristics of electrical resistance and water tightness.

The SpeedFun Ribelle ebike tuning for Bosch always shows real data on the display and can be activated or deactivated by pressing a simple sequence of keys directly from the ebike handlebar control. The activation and deactivation of the device is indicated on the display.

SpeedFun Ribelle for Bosch thanks to its particular operating algorithm comes into operation when 16 km/h is reached without the cyclist noticing any difference in assistance. It does not intervene in any way at low speeds. This important precaution has been implemented to avoid power losses, failures or “hiccup” operations.

SpeedFun Ribelle for Bosch  is available in two versions:

  • Ribelle for Bosch standard: allows you to unlock the ebike over 25 Km/h leaving the real data on the display.
  • Ribelle Plus for Bosch: same functions as the standard version but more:
    • – Max speed setting: you can set the max speed after which the motor stops to help.
    • – “Anti-theft” function: a sequence of keys can be activated to be entered within 10s of turning on the ebike (each device has its own sequence which is different from all the others). If the sequence is not entered correctly the ebike will turn off and will not assist.
    • – Torque curve modification: it is possible to choose between 3 different pre-set levels that modify the motor response.

Important notice:
COBI display and SmartHub: the Ribelle Plus tuning device is compatible with COBI s SmartHub display but only allows the activation and deactivation of the release, all other features cannot be managed.
“Personalized pedaling/assistance personalization” mode: the Ribelle tuning device (both standard and plus) is not compatible with this feature offered by Bosch on Nyon displays (including the new Nyon 2021).

 

The main features

– Totally invisible externally

– Show real data on display and is compatible with Intuvia, Purion, Nyon (including new Nyon 2021) and Kiox displays

– It can be installed/uninstalled at any time thanks to the original connectors and measures only 38 x 16.5 x 7.5 mm

– Allows you to reach speeds with assistance activated even over 60 kmH (info)

– Easy to install, ready to use, plug and go

– Compatible with Bosch Gen. 2 (Active, Performance and Performance CX 2014, 2015, 2016, 2017, 2018, 2019 and 2020), Gen. 3 (Active Line, Active Line Plus 2018, 2019 and 2020) and Gen. 4 ( Performance CX and Performance Line 2020 and 2021)

– Can be activated and deactivated with a sequence of keys

– It self-learns the parameters of the e-bike, stores and maintains the desired settings

– Internal firmware upgradeable to any new algorithms developed by the SpeedFun team (the device must be sent)

 

Assembly and Use Instructions

Instruction and connection diagram for new Ribelle for Bosch

Video Assembly Instructions SpeedFun Ribelle on Bosch gen. 4

 

Video Assembly Instructions SpeedFun Ribelle on Bosch gen. 4

Additional information
Assistance:

Increase assistance up to 60 km/h

Display data:

Show real data on the display

Display compatibility:

Intuvia, Purion, Nyon (including new Nyon 2021) and Kiox

Engine compatibility:

Bosch Gen. 2 (Active, Performance and Performance CX 2014, 2015, 2016, 2017, 2018, 2019 and 2020), Gen. 3 (Active Line, Active Line Plus 2018, 2019 and 2020) and Gen. 4 (Performance CX and Performance Line 2020 and 2021)

Activation / Deactivation:

Activation and deactivation of the device with key sequence (see instructions)

Dimensions:

The device measures 38 x 16.5 x 7.5 mm.

Version:

Ribelle for Bosch standard, Ribelle Plus for Bosch

Reviews

There are no reviews yet.

Be the first to review “SpeedFun Ribelle for Bosch”

This site uses cookies to enhance your experience. By continuing to the site you accept their use. More info in our cookies policy.     ACCEPT

ATTENTION, IMPORTANT NOTICE
Once the SpeedFun speed release device has been installed, the electric bicycle, if exceeding the limit of 25 kmH, is equated to a moped and as such, if traveling in public places, it needs to be homologated-registered by the Civil Motorization. subject to the payment of the road tax and insurance coverage, must have a license plate, cannot circulate on cycle paths and the driver is obliged to drive with a license and must use a helmet. In addition, driving a motor bicycle equivalent to a moped that does not comply with the aforementioned provisions entails the administrative seizure of the vehicle and financial penalties that vary according to the infringement committed. The manufacturer of the speed release system declines all responsibility for any damage caused to pedal-assisted bicycles on which the device is mounted as well as direct or indirect damage to people or things.
SpeedFun – Phase B snc declines any responsibility for any anomalies caused by the anti-tuning defenses that the engine manufacturers could activate.
Remember that the modification to the bicycle could invalidate the manufacturer’s warranty.

EBIKE SOFTWARE COMPATIBLE WITH SPEEDFUN DEVICES
The operation of the SpeedFun devices is guaranteed for the software versions of the ebikes released up to the date of purchase of the device itself.
If the ebike is subsequently updated with software for which the SpeedFun device has not been designed, its failure may occur.
Before updating your engine, it is necessary to check the compatibility with your SpeedFun device.

NB: All the brands mentioned on this site are named exclusively to identify the models of engines and bicycles on which our devices are compatible. They are the property of the respective owners and are in no way related to our company.

Use your helmet, save your life!

Contact