SpeedFun Ribelle for TQ HPR 120S
  1. Home
  2. Products
  3. SpeedFun Ribelle for TQ HPR 120S
SpeedFun Rebel TQ Flyon ebike speed release kit
  • SpeedFun Rebel TQ Flyon ebike speed release kit

SpeedFun Ribelle for TQ HPR 120S

218,38€

SpeedFun RIBELLE is an electronic and smart speed release device that needs no external power.

It is designed for Haibike TQ Flyon motors to evade the speed block at 25km/h allowing to increase its active assistance up to speeds that can exceed 50km/h by fully exploiting the potential of the TQ HPR 120S motor.

The Ribelle tuning device for TQ HPR 120S engines always shows real speeds and distances on the display.

SKU RIB_TQ Categories ,

Share

What is SpeedFun RIBELLE for TQ HPR 120S?

SpeedFun RIBELLE is an electronic and intelligent e-bike release device  that does not require any external power supply.

It is designed for the TQ HPR 120S motors used on the Haibike Flyon to circumvent the speed block at 25 kmH, allowing to increase its active assistance up to speeds that can exceed 50 KmH (info) by fully exploiting the potential of the TQ HPR 120S motor.

SpeedFun REBEL shows all the real data on the display.

SpeedFun RIBELLE is equipped with a self-learning system to memorize all the parameters of the ebike on which it is mounted. Therefore, no settings are required.

Speedup RIBELLE is mounted in a very simple way by placing it between the speed sensor and the motor and between the display and the motor using original connectors that do not alter the characteristics of electrical resistance and water tightness.

SpeedFun RIBELLE can be activated and deactivated with a sequence of keys (see instructions). Animated feedback is shown on the display whenever the on or off status is changed.

Additional information
Installation

Internal (totally invisible from the outside)
Dimensions

55 x 17 x 13 mm
Connections

Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring)
Assistance

Up to 60 km/h approx.
Compatible motor

TQ HPR 120S
Compatible displays

Any display and handlebar control
Data displayed (on display or app)

All real data
Device power

No external power supply required

Assembly and use instructions

Instructions for installation and use of Ribelle for TQ HPR 120S

Video assembly instructions

Related products

ATTENTION, IMPORTANT NOTICE

Once the SpeedFun speed release device has been installed, the electric bicycle, exceeding the limit of 25 kmH, is treated as a moped and as such, if circulating in public places, requires approval-registration by the Civil Motorization, it is subject to payment of road tax and insurance coverage, must have a license plate, cannot circulate on cycle paths and the driver is required to have a driving license and must use a helmet. Furthermore, driving a motor bicycle equivalent to a moped that does not comply with the aforementioned provisions will result in the administrative seizure of the vehicle and pecuniary penalties which vary according to the infringement committed. The manufacturer of the speed release system declines all responsibility relating to any damage caused to pedal assisted bicycles on which the device is mounted as well as direct or indirect damage to people or things.
SpeedFun – Phase B snc declines all responsibility for any anomalies caused by the anti-tuning defenses that the engine manufacturers could activate.
Please note that modifying your bicycle could invalidate the manufacturer’s warranty.

SOFTWARE COMPATIBLE WITH SPEEDFUN DEVICES
The functioning of the SpeedFun devices is guaranteed for the software versions of the ebikes released up to the date of purchase of the device itself.
If the ebike is subsequently updated with software for which the SpeedFun device was not designed, it may not work.
Before upgrading your engine you need to check compatibility with your SpeedFun device.

NB: All the brands mentioned on this site are mentioned only and exclusively to identify the models of motors and bicycles on which our devices are compatible. This brand are the property of their respective owners and are in no way related to our company.

Use your helmet, save your life!

CONTACTS

Speedfun by Phase B s.n.c.
via L. da Vinci, 13
35020 Casalserugo (PD)
C.F./P.IVA IT05173510289

LINK UTILI

ABOUT US

PRODUCTS

B2B

TERMS AND CONDITIONS

SOCIAL
© 2024 Speed Fun. All rights reserved

Privacy Preference Center

Privacy Preferences