SpeedFun Ribelle for Brose – Fantic
SpeedFun Ribelle is a tuning for Fantic ebike with a Brose motor that allows you to remove the speed block at 25 kmH and increase its active assistance up to speeds that can exceed 60 KmH by fully exploiting the potential of the motor.
This speed release device is compatible only and exclusively with Brose Alu (Aluminum) and S-Mag (Magnesium) motors mounted on Fantic ebike and equipped with Comfort display or Brose Allround, Central and Remote display.
The Ribelle Fantic ebike tuning device with Brose always shows real speed and mileage on the display.
What is the SpeedFun Ribelle tuning for Fantic ebike with Brose motor?
SpeedFun Ribelle is a ebike tuning for Fantci eb ike with Brose motors that allows you to increase the speed of the ebike by removing the block set at 25 km/h. With SpeedFun Ribelle, active assistance is increased up to speeds that can exceed 60 km/h (info), making full use of the engine’s potential.
This speed release device is compatible only and exclusively with Fantic e-bikes equipped with a Brose Alu (Aluminum) or S-Mag (Magnesium) engine and a Comfort display or a Brose Allround, Central and Remote display.
SpeedFun Ribelle is a very small device, measuring only 38 x 16,5 x 7,5 mm. It is equipped with compatible connectors thanks to which no physical modification of the ebike is necessary and do not alter the characteristics of electrical resistance and water tightness.
The SpeedFun Ribelle ebike tuning for Fantic always shows real data on the display and can be activated or deactivated by pressing a simple sequence of keys directly from the ebike handlebar control. The activation and deactivation of the device is indicated on the display.
SpeedFun Ribelle for Fantic ebike thanks to its particular operating algorithm comes into operation when 16 km/h is reached without the cyclist noticing any difference in assistance. It does not intervene in any way at low speeds. This important precaution has been implemented to avoid power losses, failures or “hiccup” operations.
Ebike Fantic with Brose motor where the Ribelle device was successfully installed
(this list is illustrative and not exhaustive)
– Fantic XFT 1.5 Carbon Factory
– Fantic XFT 1.5 Carbon Race
– Fantic XFT 1.5 Carbon Sport
– Fantic XFT 1.5 Carbon
– Fantic XFT 1.5 Sport
– Fantic XFT 1.5
– Fantic XMF 1.7 Carbon Race
– Fantic XMF 1.7 Carbon
– Fantic XMF 1.7
– Fantic XEF 1.9 Factory
– Fantic XEF 1.9 Race
– Fantic XXF 2.0 Factory
– Fantic XXF 2.0 Race
Additional information
Installation | Internal (totally invisible from the outside) |
---|---|
Dimensions | 37 x 22 x 7,5 mm |
Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
Assistance | Over 60 km/h |
Compatible motor | Brose motors (both Alu and Mag) installed on Fantic ebikes |
Compatible displays | Display Brose Allround, Central and Remote, Display Comfort (Fantic) |
Data displayed (on display or app) | All real data |
Device power | No external power supply required |
Be the first to review “SpeedFun Ribelle for Brose – Fantic”
Assembly and use instructions
Video assembly instructions
Reviews
There are no reviews yet.