SpeedFun Furious Evo for Yamaha
SpeedFun Furious Evo is an ebike tuning that allows you to remove the 25 kmH speed block by fully exploiting the potential of the Yamaha motors.
This ebike tuning device is specially designed to unlock the speed of Yamaha PW, PW-X, PW-X2, PW-SE, PW-TE, PW-ST, PW-CE and PW-C2 motors mostly mounted on Haibike, Yamaha, Ghost, Lapierre, MBK, Winora, Gitane, Bixs, Rockrider (Decathlon) and many more ebikes.
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time even without being connected to the motor light output.
What is Yamaha SpeedFun Furious Evo ebike tuning?
The function of the Furious Evo tuning device for Yamaha is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).
When the tuning device is active, having no communication with the display, it will show the altered data on the display starting from a certain threshold.
The Furious evo speed release device for Yamaha is compatible with Yamaha PW, PW-X, PW-X2, PW-SE, PW-TE, PW-ST, PW-CE and PW-C2 motor mostly installed on Haibike, Ghost ebikes , Lapierre, MBK, Winora, Gitane, Bixs, Rockrider (Decathlon) and many others regardless of the type of display or lateral control of the ebike.
The Furiosu Evo tuning device for Yamaha can be activated/deactivated by simply pressing the ebike’s light button. If the ebike already has the lights connected to the light output, or if it is not possible to use it, it will still be possible to activate/deactivate the tuning with a very practical system (for more information see the instructions).
The device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.
ATTENTION!
This device is not compatible with Yamaha brand ebikes (e.g. Yamaha Moro, CrossCore, Booster, Wabash etc.)
Ebike with Yamaha PW, PW-X, PW-X2, PW-SE, PW-TE, PW-ST, PW-CE and PW-C2 motor where the Furious Evo device was successfully installed
(this list is illustrative and not exhaustive)
– Haibike Xduro Nduro 8.0
– Haibike Xduro Nduro 5.0
– Haibike Xduro Nduro 10.0
– Haibike Xduro Alltrail 6.0
– Haibike Xduro Alltrail 5.0
– Haibike Xduro Allmtn 8.0
– Haibike Xduro Allmtn 5.0
– Haibike Xduro Allmtn 10.0
– Rockrider (Decathlon) E-EXPL 520
– Haibike Nduro 7
– Haibike Hardseven 10, 9, 8, ecc
– Haibike Hardnine 10, 9, 8, ecc
– Haibike Fullseven 9, 8, 7, ecc
– Haibike Fullnine 10, 9, 8, 7, ecc
– Haibike Dwnhll
– Haibike Allmtn se e Allmtn cf se
– Haibike Allmtn 7, 6, 5, ecc
– Haibike Xduro Adventr FS
– Haibike Xduro Adventr 6.0 e Xduro Adventr 5.0
– Haibike Trekking 9, Trekking 9 Lowstep e Trekking 9 Lowstandover
– Haibike Trekking 8, Trekking 8 Lowstandover
– Haibike Trekking 7, Trekking 7 Lowstep e Trekking 7 Lowstandover
– Haibike Trekking 6, Trekking 6 Lowstep e Trekking 6 Lowstandover
Additional information
Installation | Internal (totally invisible from the outside) |
---|---|
Dimensions | 31 x 16,5 x 7,5 mm |
Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
Assistance | Over 60 km/h |
Compatible motor | Yamaha PW-X, PW-X2, PW-SE, PW-TE, PW-ST |
Compatible displays | Any display and handlebar control |
Data displayed (on display or app) | Altered (halved above a certain threshold) |
Device power | No external power supply required |
Instruction for installation and use
Instructions for use and connection diagram Furious Evo for Yamaha
Video assembly instructions