SpeedFun Furious Evo for Specialized Turbo Levo, Kenevo, Tero, Como and Vado
SpeedFun Furious Evo is an ebike tuning that allows you to remove the 25 kmH speed block by fully exploiting the potential of the Brose used by Specialized.
This ebike tuning device is specially designed to unlock the speed of Specialized Turbo Levo, Turbo Kenevo, Turbo Tero, Turbo Como and Turbo Vado ebikes equipped with Brose engine (officially “Turbo 1.1”, “Turbo 1.2”, “Turbo 2.1” and “Turbo Full Power System 2.2”) and with TCU (CTU1) and MasterMind TCU (TCU2).
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time and without the need for connections to the light output.
What is SpeedFun Furious Evo ebike tuning for Specialized Turbo Levo, Kenevo, Tero, Como and Vado?
The function of the Furious Evo tuning device for Specialized is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).
When the tuning device is active, having no communication with the TCU, it will show the halved data on any display (or app) starting from a certain threshold.
SpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed on Specialized Turbo Levo, Turbo Kenevo, Turbo Tero, Turmo Como and Turbo Vado ebike with Brose motor (officially “Turbo 1.1”, “Turbo 1.2”, “Turbo 2.1” and “Turbo Full Power System 2.2”) equipped with TCU1 or TCU2 “MasterMind”.
The Furiosu Evo tuning device can be activated/deactivated in a very practical system (for more information see the instructions). The device is supplied plug and go ready to use and is installed in a very simple way thanks to the compatible connectors with which no physical modification of the ebike is necessary.
Specialized ebike where the Furious Evo device was successfully installed
(this list is illustrative and not exhaustive)
– Specizlied Turbo Kenevo Expert
– Specizlied Turbo Kenevo Comp
– Specizlied Turbo Levo Hardtail Comp M5
– Specialized Turbo Levo Hardtail M5
– Specialized S-Works Turbo Levo
– Specialized Turbo Levo Pro
– Specialized Turbo Levo Expert
– Specialized Turbo Levo Comp M5
– Specialized Turbo Levo M5
– Specialized Turbo Tero 5.0
– Specialized Turbo Tero 4.0 EQ
– Specialized Turbo Tero 4.0
– Specialized Turbo Tero 3.0
– Specialized Turbo Tero 3.0 Step-Through
Additional information
| Installation | Internal (totally invisible from the outside) |
|---|---|
| Dimensions | 37 x 22 x 7,5 mm |
| Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
| Assistance | Over 60 km/h |
| Compatible motor | All Brose motors both Alu (aluminium) and Mag (magnesium) |
| Compatible displays | Any display and handlebar control |
| Data displayed (on display or app) | Altered (halved above a certain threshold) |
| Device power | No external power supply required |
Assembly and use instructions
Instructions for assembly and use Furious Evo for Specialized-Brose
Video assembly instructions
