SpeedFun Furious Evo easy+ for BH 2EXMAG and BHZ by Seg
SpeedFun Furious Evo easy+ is a tuning for BH e-bikes equipped with a BH 2EXMAG motor that allows you to remove the 25 km/h speed block.
This release device is specially designed for the BH 2EXMAG and BHZ by Seg motors used on BH iLynx Trail Carbon, BH iLynx Trail Carbon Pro, BH iLynx Race Carbon Pro, BH iLynx Race Carbon LT and BH Core Race Carbon regardless of the display or the handlebar control. .
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time and without being connected to the light output.
Check the connectors before purchasing!
Before purchasing SpeedFun tuning, check the color of the speed sensor connectors. Between 2022 and 2023 BH created a new motor. This new motor has connectors of a different shape and color compared to the previous ones. To avoid making mistakes, remember that:
Black connectors = BH 2EXMAG black connectors
Red connectors = BH 2EXMAG red connectors
What is SpeedFun Furious Evo tuning for BH 2EXMAG and BHZ by Seg?
The function of the Furious Evo tuning device for BH 2EXMAG and BHZ by Seg is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motr a speed always lower than 25 KmH in order to obtain a real speed with very high active engine. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by one’s legs (info).
This speed release device is compatible with BH 2EXMAG and BHZ by Seg motors regardless of the type of display or handlebar control.
SpeedFun Furious evo for BH 2EXMAG is available in two versions:
- – version for 2EXMAG motors (with black connectors): compatible with BH 2EXMAG and BHZ by Seg motors equipped with black connectors connecting the motor and speed sensor
- – version for 2EXMAG motors (with red connectors): compatible with BH 2EXMAG motors equipped with red connectors connecting the motor and speed sensor
All SpeedFun Furious Evo tuning devices are supplied ready to use, plug and go with original connectors, which can be activated/deactivated as desired with a very practical system (for more information consult the instructions) and maintain the setting even after turning off the ‘ebike.
Attention!
This device is not compatible with BH ebikes equipped with Dapu MD250 motors (also called BH Drive-1E 36V, BH 1E, BH 2E and BH 2ESMAG). For ebikes with this engine, the Furious Evo for Dapu MD250 is available (click here).
Ebike with BH 2EXMAG and BHZ by Seg motor where the Furious Evo easy+ device has been successfully installed
(this list is illustrative and not exhaustive)
BH 2EXMAG
– BH iLynx Trail Carbon Pro 8.9
– BH iLynx Trail Carbon Pro 8.8
– BH iLynx Trail Carbon 8.7
– BH iLynx Trail Carbon 8.6
– BH iLynx Race Carbon Pro 7.9
– BH iLynx Race Carbon Pro LT 7.8
– BH iLynx Race Carbon LT 7.7
– BH iLynx Race Carbon LT 7.6
– BH Core Race Carbon 1.6
– BH Core Gravelx Carbon 2.6
– BH Core Gravelx 2.4
– BH Core Gravelx 2.2
BHZ by Seg
– BH iLynx Trail
– BH iLynx Race
– BH iLynx Race Carbon
Additional information
| Installation | Internal (totally invisible from the outside) |
|---|---|
| Dimensions | 37 x 22 x 7,5 mm |
| Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
| Assistance | Over 60 km/h |
| Compatible motor | BH 2EXMAG (Gen 1), BH 2EXMAG (Gen 2), BHZ by Seg |
| Compatible displays | Any display and handlebar control |
| Data displayed (on display or app) | Altered (variables above a certain threshold) |
| Device power | No external power supply required |
Be the first to review “SpeedFun Furious Evo easy+ for BH 2EXMAG and BHZ by Seg”
Assembly and use instructions
Instructions for assembly and use of Furious Evo for BH 2EXMAG
Reviews
There are no reviews yet.