SpeedFun Ribelle for Giant Syncdrive Pro (PW-X3) and Ridecontrol Go
SpeedFun Ribelle is a tuning for Giant ebikes with Syncdrive Pro engine (from 2022) that allows you to remove the speed block at 25 kmH and increase its active assistance up to speeds that can exceed 60 KmH by fully exploiting the motor’s potential.
This speed release device is compatible only and exclusively with Giant ebikes equipped with Syncdrive Pro (PW-X3) motor from 2022 combined with Ridecontrol Go display and Ridecontrol Ergo 3 handlebar control.
The Ribelle tuning device for Giant ebikes always shows real speeds and distances on the display.
What is SpeedFun Ribelle ebike tuning for Giant Syncdrive Pro (PW-X3) and Ridecontrol Go?
SpeedFun Ribelle is a tuning for Giant Syncdrive Pro (PW-X3) ebike from 2022 that allows you to increase the speed of the ebike by removing the block set at 25 kmH. With SpeedFun Ribelle, active assistance is increased up to speeds that can exceed 60 km/h (info), making full use of the motor’s potential.
This speed release device is compatible only and exclusively with Giant Syncdrive Pro (PW-X3) motors from 2022 combined with Ridecontrol Go display and Ridecontrol Ergo 3 handlebar control used mostly on Giant Reign E+ 0, Reign E+ 1, Trance X E+ 1 , Trance X E+ 2, Trance X Advance E+ 1 and Trance X Advance E+ 2.
The Ribelle tuning device for Giant ebikes always shows real speeds and distances on the display, if present, or in the app. It can be activated or deactivated by pressing a simple sequence of keys directly from the ebike handlebar control.
SpeedFun Ribelle is a very small device, measuring only 37 x 22 x 7.5 mm. It is equipped with original connectors thanks to which no physical modification of the ebike is necessary and they do not alter the electrical resistance and water resistance characteristics.
ATTENTION!
This device is not compatible with Giant drive units with software versions 2022 or later
Giant Ebike with Syncdrive Pro (PW-X3) motor from 2022 where the Ribelle device was successfully installed
(this list is exemplary and not exhaustive)
– Reign E+ 0
– Reign E+ 1
– Trance X E+ 1
– Trance X E+ 2
– Trance X Advance E+ 1
– Trance X Advance E+ 2.
Additional information
| Installation | Internal (totally invisible from the outside) |
|---|---|
| Dimensions | 37 x 22 x 7,5 mm |
| Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
| Compatible motor | Giant Syncdrive Pro 2 (PW-X3), Giant Syncdrive Sport 2 (PW-X3) |
| Compatible displays | Ridecontrol Go |
| Data displayed (on display or app) | All real data |
| Device power | No external power supply required |
Be the first to review “SpeedFun Ribelle for Giant Syncdrive Pro (PW-X3) and Ridecontrol Go”
Assembly and use instructions
Instructions for assembly and use Ribelle for Giant Syncdrive Pro (PW-X3) from 2022 + Ridecontrol Go
Related products
Reviews
There are no reviews yet.