SpeedFun Ribelle for Brose-Sram Eagle Powertrain
SpeedFun Ribelle is a tuning for ebike with a Brose-SRAM motor that allows you to remove the speed block at 25 kmH and increase its active assistance up to speeds that can exceed 60 KmH by fully exploiting the potential of the motor.
This speed release device is compatible only and exclusively with Brose-Sram Eagle Powertrain motors mounted on ebikes equipped with a mechanical derailleur.
The Ribelle ebike tuning device for Brose-Sram Eagle Powertrain always shows real speed and mileage on the display.
Out of stock
What is the SpeedFun Ribelle tuning for Brose-Sram Eagle Powertrain motor?
SpeedFun Ribelle is a ebike tuning for ebike with Brose-Sram Eagle Powertrain motors that allows you to increase the speed of the ebike by removing the block set at 25 km/h. With SpeedFun Ribelle, active assistance is increased up to speeds that can exceed 60 km/h (info), making full use of the engine’s potential.
This speed release device is compatible only and exclusively with ebikes equipped with a Brose-SRAM Eagle Powertrain motor and mechanical derailleur.
This tuning device is equipped with compatible connectors thanks to which no physical modification of the ebike is necessary and do not alter the characteristics of electrical resistance and water tightness.
The SpeedFun Ribelle ebike tuning always shows real data on the display and can be activated or deactivated by pressing a simple sequence of keys directly from the ebike handlebar control/display.
SpeedFun Ribelle for Brose-SRAM Eagle Powertrain motor thanks to its particular operating algorithm comes into operation when 16 km/h is reached without the cyclist noticing any difference in assistance. It does not intervene in any way at low speeds. This important precaution has been implemented to avoid power losses, failures or “hiccup” operations.
Ebike Fantic with Brose motor where the Ribelle device was successfully installed
(this list is illustrative and not exhaustive)
– GasGas ECC6
– GasGas ECC5
– GasGas ECC4
– GasGas MXC6
– GasGas MXC5
– GasGas MXC4
– Nukeproof Megawatt Carbon RS
– Transition Repeater PT
– Berria Stratos
– Propain Ekano 2 CF
Additional information
| Installation |
Internal (totally invisible from the outside) |
|---|---|
| Dimensions |
37 x 22 x 7,5 mm |
| Connections |
Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
| Assistance |
Over 60 km/h |
| Compatible motor |
Sram Eagle Powertrain (Brose) |
| Compatible displays |
Any display and handlebar control |
| Compatibile con cambio elettronico |
No |
| Data displayed (on display or app) |
All real data |
| Device power |
No external power supply required |
Be the first to review “SpeedFun Ribelle for Brose-Sram Eagle Powertrain”
Assembly and use instructions
Video assembly instructions
Related products
Reviews
There are no reviews yet.