SpeedFun Ghost for Mahle Ebikemotion X35 and X35+
SpeedFun Ghost is an electronic and intelligent speed tuning device that does not require any external power supply.
It is designed to circumvent the speed block at 25 kmH allowing to increase the active assistance of the Mahle Ebikemotion X35 and X35+ motors.
What is SpeedFun Ghost tuning for Mahle Ebikemotion X35 and X35+?
SpeedFun Ghost is an electronic and intelligent tuning device that does not need any external power supply.
It is designed to circumvent the speed block at 25 kmH allowing to increase the active assistance of the Mahle Ebikemotion X35 and X35+ motors.
Due to the constructive characteristics of this type of motor it is possible to reach speeds of about 29/30 KmH depending on the ebike models.
This tuning for Mahle Ebikemotion X35 and X35+ is active right from installation and if an app or display is connected, the distance and speed data will be indicated falsified. Assistance is slightly reduced beyond 25 KmH.
The tuning for Mahle Ebikemotion X35 and X35+ SpeedFun Ghost is available in only one version:
- – Version slim: this round section version measures ∅14 x 170 mm and is slightly flexible. It can be inserted partially or totally inside the tubes in the frame or be fixed externally. This version is the most used and adaptable to most ebikes.
Before buying, please check the size on your ebike.
WARNING!
This device is not tested with e-bikes equipped with a battery extender.
This device is not compatible with X30 and X20 motors.
Ebike with Mahle Ebikemotion X35 and X35+ motors where the Ghost tuning device has been successfully installed
(this list is illustrative and not exhaustive)
– Wilier Cento1 Hybrid
– Bianchi Aria E-Road (yo install the device you need to remove the cover that goes from the battery to the motor)
– Scott Addict eRIDE 10
– Scott Addict eRIDE 15
– Scott Addict eRIDE 20
– Scott Addict eRIDE 30
– Scott Addict eRIDE Ultimate
– Orbea Gain
– Orbea Vibe H10, H10 Mud e H10 EQ
– Orbea Vibe H30, Vibe H30, H30 Mud e H30 EQ
– Olmo e.vento sport
– SuperSix EVO Neo 3
– 3T Boost, 3T Racemax e 3T Racemax Boost Dropbar
– Lapierre e-Sensium 5.2 2023
– Merida eSILEX 400
– Argon18 Subito E-road
Installation and use instructions
SpeedFun GHOST installation instructions for Ebikemotion X35 and X35+
Video installation tutorial
Additional information
| Installation |
External (visible from the outside) |
|---|---|
| Dimensions |
∅14 x 170 mm |
| Connections |
Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
| Assistance |
Up to 29-30km/h max. |
| Compatible motor |
Mahle Ebikemotion X35, Mahle Ebikemotion X35+ |
| Compatible displays |
Any display and handlebar control |
| Data displayed (on display or app) |
Altered (variables above a certain threshold) |
| Device power |
No external power supply required |
Assembly and use instructions
SpeedFun GHOST assembly instructions for Ebikemotion X35 and X35+
Video assembly instructions