Y splitter cable

15,86

Y splitter cable for light output.

When the ebike is equipped with headlights operated by the controls on the handlebar and then powered by the same battery of the ebike, it means that the light output of the engine is occupied for the connection of the same. To obtain an additional parallel output for the connection and operation of the FURIOUS device on / off lights, the Y splitter cable must be installed which allows an additional output to be obtained.

Installation is very simple, just disconnect the connector between the engine and the headlights and connect the Y-cable.

 

Clear


Share

Y splitter cable

When the ebike is equipped with headlights operated by the controls on the handlebar and then powered by the same battery of the ebike, it means that the light output of the engine is occupied for the connection of the same. To obtain an additional parallel output for the connection and operation of the FURIOUS device on/off lights, the Y splitter cable must be installed which allows an additional output to be obtained.
Installation is very simple, just disconnect the connector between the engine and the headlights and connect the Y-cable.

The Y splitter cable is available for the following engines:
– Y splitter cable for Ananda M100, Bafang Max Drive, Modest Drive and Yamaha PW, PW-X, PW-SE (CY-01)
– Y splitter cable for Giant Sinc Drive Life, Sport, Pro. OLIEDS, Oli Move Plus, Oli Move Sport AM-80 Atala (CY-02)

ATTENTION, IMPORTANT NOTICE

Once the SpeedFun speed release device has been installed, the electric bicycle, exceeding the limit of 25 kmH, is treated as a moped and as such, if circulating in public places, requires approval-registration by the Civil Motorization, it is subject to payment of road tax and insurance coverage, must have a license plate, cannot circulate on cycle paths and the driver is required to have a driving license and must use a helmet. Furthermore, driving a motor bicycle equivalent to a moped that does not comply with the aforementioned provisions will result in the administrative seizure of the vehicle and pecuniary penalties which vary according to the infringement committed. The manufacturer of the speed release system declines all responsibility relating to any damage caused to pedal assisted bicycles on which the device is mounted as well as direct or indirect damage to people or things.
SpeedFun – Phase B snc declines all responsibility for any anomalies caused by the anti-tuning defenses that the engine manufacturers could activate.
Please note that modifying your bicycle could invalidate the manufacturer’s warranty.

SOFTWARE COMPATIBLE WITH SPEEDFUN DEVICES
The functioning of the SpeedFun devices is guaranteed for the software versions of the ebikes released up to the date of purchase of the device itself.
If the ebike is subsequently updated with software for which the SpeedFun device was not designed, it may not work.
Before upgrading your engine you need to check compatibility with your SpeedFun device.

NB: All the brands mentioned on this site are mentioned only and exclusively to identify the models of motors and bicycles on which our devices are compatible. This brand are the property of their respective owners and are in no way related to our company.

Use your helmet, save your life!


CONTACTS

Speedfun by Phase B s.n.c.
via L. da Vinci, 13
35020 Casalserugo (PD)
C.F./P.IVA IT05173510289

SOCIAL

Privacy Preference Center