SpeedFun FURIOUS for Yamaha

84,00€ – 94,00

SpeedFun FURIOUS is an electronic and intelligent speed release device that requires no external power supply.

It is designed for Yamaha PW, PW-X and PW-SE, products from 2015 to 2020, and for SINC DRIVE 2017 and SINC DRIVE PRO 2018-19-20 engines to avoid the speed block at 25 kmH, allowing it to increase its active assistance up to a speed of 50 KmH, making full use of the potential of the excellent Yamaha engine.

Vedi di più...
Clear

SKU N/A Category


Share

What is SpeedFun Furious?

SpeedFun FURIOUS is an electronic and intelligent speed release device that requires no external power supply.

It is designed for Yamaha PW, PW-X and PW-SE, products from 2015 to 2019, and for SINC DRIVE 2017 and SINC DRIVE PRO/SPORT 2018-19 engines to avoid the speed block at 25 kmH, allowing it to increase its active assistance up to a speed of 50 KmH, making full use of the potential of the excellent Yamaha engine.

Speedup FURIOUS can be assembled in a very simply way by interposing it between the speed sensor and the motor using original connectors that do not alter the characteristics of electrical resistance and water tightness. It does not modify the electronics of the Yamaha engine in any way, which can be reset at any time and in a few minutes to the factory configuration. This allows the guarantee and the effective commercial value of the bicycle to remain unchanged.

Once the device is activated, the bicycle tachograph will show half its speed and data making it possible, by simply multiplying by two, the calculation of the actual speed and kilometers traveled.

Furious for Yamaha is available in two versions:

EASY version: from the moment of installation the device is working, always active, not deactivable. Can be installed without restrictions in all Yamaha PW, PW-X, Sinc Drive and Sinc Drive Pro/Sport engines

On/Off Lights Version: by simply pressing the “LIGHT” key on the Ebike, the device is activated and deactivated.

ATTENTION! This version can be installed in all Yamaha PW, PW-X, Sinc Drive and Sic Drive Pro/Sport engines with the following limitations:

1: If your ebike is equipped with headlights that can be operated by the “Lights” button (powered by the ebike battery) this version of Furious can be installed but it is also necessary to purchase the “Y splitter cable” that allows the splitting of the ‘Lights output otherwise it is already occupied by the connection with the lights. Once installed, the speed release will be activated simultaneously with the lights.

2: This version of Furious can not be mounted on the Haibike models with electronic shock absorber system E: I-Shock because the light output is always active and is used to recharge the internal battery to the suspension system.

Furious On / Off Lights on E-bikes of GIANT brand:

– For the 2016 engines it is necessary to check the model of the light output connector that Giant used: If the connector used was BLACK it is necessary to purchase, in addition to the standard device “FURIOUS on / off lights for Yamaha-Gint Sinc Drive and Sinc Drive Pro/Sport” also the “Giant 2016 Light Output Adapter Cable” that allows you to connect the “Standard”(White) connector of Furious to the connector (Black) that Giant has used.

– For the Sinc-Drive 2017-18-19 and Sinc-Drive Pro/Sport 2017-18-19 engines, buy directly the special version “for Giant” which is already equipped with suitable connectors.

NOTE 1: The Furious devices, WHEN ACTIVATED, due to their peculiarity of letting the motor perceive half of the revolutions of the wheel, can cause discontinuity of supply A VERY LOW SPEED (normally less than 6 kmH real). For this reason we recommend the Activable / Deactivable version so that you can deactivate the speed release in such situations and avoid the occurrence of the problem.

 

The main features

– Totally INVISIBLE

– Can be disassembled / disassembled at any time without leaving any trace

– It does not need any destructive modification to the original parts of the bicycle

– Allows you to reach speeds with assistance activated even 50 kmH

– Installable in a few minutes, ready to use, plug and go

– Suitable for Yamaha PW, PW-X, PW-SE, Sinc Drive and Sinc Drive Pro engines, from 2016 to 2019,  mostly assembled by Giant, Haibike, Lapierre, Atala and many others …

– Activated and deactivated by simply pressing the Lights button of the ebike (the on / off version Lights)

– It does not need batteries or external power supply

 

Video Assembly Instructions

SpeedFun Furious on ebike with Giant Syncdrive Pro engine

How to install SpeedFun Furious tuning ebike speed release kit with Yamaha PW engine


Additional information
Version:

Version EASY for Yamaha PW, PW-X, SYNCDRIVE (Giant) and SINCDRIVE PRO/SPORT (Giant), Version ON/OFF LIGHT for Yamaha PW, PW-X, PW-SE, Version ON/OFF LIGHT for Giant SYNCDRIVE and SINCDRIVE PRO/SPORT

This site uses cookies to enhance your experience. By continuing to the site you accept their use. More info in our cookies policy.     ACCEPT

ATTENTION, IMPORTANT NOTICE
Once the SpeedFun speed release device has been installed, the electric bicycle, if exceeding the limit of 25 kmH, is equated to a moped and as such, if traveling in public places, it needs to be homologated-registered by the Civil Motorization. subject to the payment of the road tax and insurance coverage, must have a license plate, cannot circulate on cycle paths and the driver is obliged to drive with a license and must use a helmet. In addition, driving a motor bicycle equivalent to a moped that does not comply with the aforementioned provisions entails the administrative seizure of the vehicle and financial penalties that vary according to the infringement committed. The manufacturer of the speed release system declines all responsibility for any damage caused to pedal-assisted bicycles on which the device is mounted as well as direct or indirect damage to people or things.
SpeedFun – Phase B snc declines any responsibility for any anomalies caused by the anti-tuning defenses that the engine manufacturers could activate.
Remember that the modification to the bicycle could invalidate the manufacturer’s warranty.

EBIKE SOFTWARE COMPATIBLE WITH SPEEDUP DEVICES
The operation of the SpeedFun devices is guaranteed for the software versions of the ebikes released up to the date of purchase of the device itself.
If the ebike is subsequently updated with software for which the SpeedFun device has not been designed, its failure may occur.
Before updating your engine, it is necessary to check the compatibility with your SpeedFun device.

NB: All the brands mentioned on this site are named exclusively to identify the models of engines and bicycles on which our devices are compatible. They are the property of the respective owners and are in no way related to our company.

Use your helmet, save your life!

Contact