SpeedFun Ribelle 2.0 for Giant Syncdrive Core, Life, Sport and Pro
SpeedFun Ribelle 2.0 is a tuning for Giant ebikes that allows you to remove the speed block at 25 kmH and increase its active assistance up to speeds that can exceed 60 KmH by fully exploiting the motor’s potential.
This speed release device is compatible only and exclusively with Giant ebikes equipped with Syncdrive Core, Life, Sport and Pro motors from 2017 combined with the Ridecontrol Dash, Ridecontrol Ergo and Ergo 2, Ridecontrol Evo and Ridecontrol One displays.
The Ribelle tuning device for Giant ebikes always shows real speeds and distances on the display.
What is SpeedFun Ribelle ebike tuning for Giant Syncdrive Core, Life, Sport and Pro?
SpeedFun Ribelle is a tuning for Giant ebikes with Syncdrive Core, Life, Sport and Pro motors from 2017 which allows you to increase the speed of the ebike by removing the block set at 25 kmH. With SpeedFun Ribelle, active assistance is increased up to speeds that can exceed 60 km/h (info), making full use of the engine’s potential.
This speed release device is compatible only and exclusively with Giant Syncdrive Core, Life, Sport and Pro motors from 2017 combined with the Ridecontrol Dash, Ridecontrol Ergo and Ergo 2, Ridecontrol Evo and Ridecontrol One displays/handlebar controls used on Giant from 2017.
The Ribelle tuning device for Giant ebikes always shows real speeds and distances on the display, if present, or in the app. It can be activated or deactivated by pressing a simple sequence of keys directly from the ebike handlebar control.
SpeedFun Ribelle is a very small device, measuring only 37 x 22 x 7.5 mm. It is equipped with original connectors thanks to which no physical modification of the ebike is necessary and they do not alter the electrical resistance and water resistance characteristics.
ATTENZIONE!
This device is not compatible with Giant ebikes equipped with Syncdrive Pro (PW-X3) motor from 2022 combined with Ridecontrol Go. The appropriate tuning is available for this engine HERE
Giant ebike with Syncdrive Core, Life, Sport and Pro motors from 2017 where the Ribelle device was successfully installed
(this list is exemplary and not exhaustive)
– Explore E+
– Talon E+
– Fathom E+
– Anytour E+
– Stance E+
Additional information
Installation | Internal (totally invisible from the outside) |
---|---|
Dimensions | 37 x 22 x 7,5 mm |
Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
Assistance | Over 60 km/h |
Compatible motor | Giant Syncdrive Core, Life, Pro and Sport |
Compatible displays | Any display and handlebar control |
Data displayed (on display or app) | All real data |
Device power | No external power supply required |
Be the first to review “SpeedFun Ribelle 2.0 for Giant Syncdrive Core, Life, Sport and Pro”
Assembly and use instructions
Assembly and use instructions Ribelle 2.0 for Giant Syncdrive Core, Life, Sport and Pro from 2017
Reviews
There are no reviews yet.