SpeedFun Furious Evo easy+ for Specialized Turbo Levo SL, Kenevo SL, Creo SL, Como SL and Vado SL

122,73

SpeedFun Furious Evo is an ebike tuning that allows you to remove the 25 kmH speed block by fully exploiting the potential of the Specialized SL 1.1 and Turbo SL 1.2 motors.

This tuning is specially designed for Mahle Specialized SL 1.1 (35Nm) and Turbo SL 1.2 motors mostly mounted on Turbo Kenevo SL, Turbo Levo SL, Turbo Creo SL, Turbo Vado SL, Turbo Como SL e Turbo Vado SL.

All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time even without connecting to the light output.


SKU FU_EVO_EA_SL_W/CONN Categories ,


Share

What is SpeedFun Furious Evo tuning for ebikes with Mahle Specialized SL 1.1 and Turbo SL 1.2 motor?

The function of the Furious Evo tuning device for Mahle Specialized SL 1.1 and Turbo SL 1.2 motors (Specialized Turbo Kenevo SL, Turbo Levo SL, Turbo Creo SL, Turbo Vado SL, Turbo Como SL and Turbo Vado SL) is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a very high real speed with the motor active. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).

When the tuning device is active, since it has no communication with the display, it will show halved data on the display starting from a certain threshold.

SpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is switched off. It can be installed on Specialized ebikes with Mahle Specialized SL 1.1 engine (35Nm) and Turbo SL 1.2 (50Nm) mostly mounted on Turbo Kenevo SL, Turbo Levo SL, Turbo Creo SL, Turbo Vado SL, Turbo Como SL and Turbo Vado SL regardless of the type of display or command side of the ebike.

The Furiosu Evo tuning device for Mahle Specialized SL 1.1 and Turbo SL 1.2 motor can be activated/deactivated with a very practical system (for further information consult the instructions) and does not require activation of the engine light output. The device is supplied plug and go ready to use, it can be installed very simply thanks to the original connectors with which no physical modification of the ebike is required.

 

Ebike with Mahle Specialized SL 1.1 and Turbo SL 1.2 motor where the Furious Evo device has been successfully installed

(this list is exemplary and not exhaustive)

Specialized Turbo Kenevo SL

– S-Works Turbo Kenevo SL
– Turbo Kenevo SL Expert
– Turbo Kenevo SL Comp

Specialized Turbo Levo SL

– Turbo Levo SL Expert Carbon
– Turbo Levo SL Expert Carbon
– Turbo Levo SL Comp Carbon
– Turbo Levo SL Comp Carbon
– Turbo Levo SL Comp

Specialized Turbo Creo SL

– S-Works Turbo Creo SL EVO
– S-Works Turbo Creo SL
– Turbo Creo SL Expert Carbon EVO
– Turbo Creo SL Expert Carbon
– Turbo Creo SL Comp Carbon EVO
– Turbo Creo SL Comp Carbon
– Turbo Creo SL Comp E5

Specialized Turbo Como SL

– Turbo Como SL 5.0
– Turbo Como SL 4.0

Specialized Turbo Vado SL

– Turbo Vado SL 4.0 Step-Through Equipped
– Turbo Vado SL 4.0 EQ

Additional information
Installation

Internal (totally invisible from the outside)

Dimensions

37 x 22 x 7,5 mm

Connections

Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring)

Assistance

Over 60 km/h

Compatible motor

Mahle Specialized SL (called by Specialized "Specialized 1.1" and "Turbo SL 1.2")

Compatible displays

Specialized TCU (CTU1), Specialized MasterMind TCU (TCU2), Specialized MasterMind TCD

Data displayed (on display or app)

Altered (halved above a certain threshold)

Device power

No external power supply required

ATTENTION, IMPORTANT NOTICE

Once the SpeedFun speed release device has been installed, the electric bicycle, exceeding the limit of 25 kmH, is treated as a moped and as such, if circulating in public places, requires approval-registration by the Civil Motorization, it is subject to payment of road tax and insurance coverage, must have a license plate, cannot circulate on cycle paths and the driver is required to have a driving license and must use a helmet. Furthermore, driving a motor bicycle equivalent to a moped that does not comply with the aforementioned provisions will result in the administrative seizure of the vehicle and pecuniary penalties which vary according to the infringement committed. The manufacturer of the speed release system declines all responsibility relating to any damage caused to pedal assisted bicycles on which the device is mounted as well as direct or indirect damage to people or things.
SpeedFun – Phase B snc declines all responsibility for any anomalies caused by the anti-tuning defenses that the engine manufacturers could activate.
Please note that modifying your bicycle could invalidate the manufacturer’s warranty.

SOFTWARE COMPATIBLE WITH SPEEDFUN DEVICES
The functioning of the SpeedFun devices is guaranteed for the software versions of the ebikes released up to the date of purchase of the device itself.
If the ebike is subsequently updated with software for which the SpeedFun device was not designed, it may not work.
Before upgrading your engine you need to check compatibility with your SpeedFun device.

NB: All the brands mentioned on this site are mentioned only and exclusively to identify the models of motors and bicycles on which our devices are compatible. This brand are the property of their respective owners and are in no way related to our company.

Use your helmet, save your life!


CONTACTS

Speedfun by Phase B s.n.c.
via L. da Vinci, 13
35020 Casalserugo (PD)
C.F./P.IVA IT05173510289

SOCIAL

Privacy Preference Center