SpeedFun Furious Evo for Bafang M400 and M420
peedFun Furious Evo is an ebike tuning that allows you to remove the 25 kmH speed block by fully exploiting the potential of the Bafang motors.
This ebike tuning device is specially designed to unlock the speed of Bafang M400 and M420 motors mostly mounted on Bottecchia, Montana, Torpado and Vektor ebike.
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time even without connecting to the light output.
What is Bafang M400 and M420 SpeedFun Furious Evo ebike tuning?
The function of the Furious Evo tuning device for Bafang M400 and M420 is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).
When the tuning device is active, having no communication with the display, it will show the halved data on the display starting from a certain threshold.
SpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed on ebike with Bafang M400 and M430 motors regardless of the type of display or side control of the ebike.
The Furiosu Evo tuning device for Bafang M400 and M420 can be activated/deactivated by simply pressing the ebike’s light button. If the ebike already has the lights connected to the light output, or if it is not possible to use it, it will still be possible to activate/deactivate the tuning with a very practical system (for more information see the instructions here). The device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.
ATTENTION!
Since 2020, speed sensors with 4-pin connectors are being produced instead of 3 (click here) as previously.
Before buying, it is important to check the version of the speed sensor connector of your bike to avoid incompatibility problems of the Furious Evo device with your engine.
By clicking here you can easily recognize whether a 4-pin or 3-pin connector has been mounted on your ebike.
Ebike with Bafang M400 and M420 motors where the Furious Evo device was successfully installed
(this list is illustrative and not exhaustive)
– Torpado Thor
– Torpado Xanto Z
– Bottecchia BE 31 Kripton E-MTB 27,5″
– Bottecchia BE 20 e-bike TRK lady 28″
– Bottecchia BE 18 e-bike TRK man 28″
– Montana E-Vort 29″ E-MTB
– Vektor Krug 27,5″
Additional information
Installation | Internal (totally invisible from the outside) |
---|---|
Dimensions | 31 x 16,5 x 7,5 mm |
Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
Assistance | Over 60 km/h |
Compatible motor | Bafang M400, Bafang M420 |
Compatible displays | Any display and handlebar control |
Data displayed (on display or app) | Altered (halved above a certain threshold) |
Device power | No external power supply required |
Be the first to review “SpeedFun Furious Evo for Bafang M400 and M420”
Assembly and use instructions
Assembly and use instruction for Furious Evo Bafang M400 M420 M300
Video assembly instructions
Reviews
There are no reviews yet.