SpeedFun Furious Evo easy+ for Rocky Mountain Dyname 4.0
SpeedFun Furious Evo easy+ is a Rocky Mountain ebike tuning with Dyname 4.0 engine that allows you to remove the 25 kmH speed block by fully exploiting the motor’s potential.
This speed release device is specially designed for Dyname 4.0 motor used only by Rocky Mountain on the Altitude Powerplay and Instinct Powerplay ebike models.
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time, without connecting to the light output.
What is SpeedFun Furious Evo easy+ tuning for Rocky Mountain Dyname 4.0?
The function of the Furious Evo easy+ tuning device for Rocky Mountain Dyname 4.0 is to electronically manipulate the rotation speed of the rear wheel and to communicate to the engine a speed that is always lower than 25 KmH in order to obtain a very high real speed with the engine active. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).
This speed unlocker is compatible with Rocky Mountain Dyname 4.0 motors from 2022 equipped with a 720Wh Powerplay battery and Jumbotron display.
When the device is active, the display will show the exact speed up to the threshold of approximately 15 KmH, beyond which a manipulated speed will always be shown below 25 KmH.
SpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is switched off.
It is supplied plug and go ready to use, it is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.
Ebike with Rocky Mountain Dyname 4.0 motor where the Furious Evo easy+ device has been successfully installed
(this list is illustrative and not exhaustive)
– Altitude Powerplay Carbon 90 Rally Edition
– Altitude Powerplay Carbon 70
– Altitude Powerplay Alloy 70
– Altitude Powerplay Alloy 50
– Altitude Powerplay Alloy 30 Coil
– Instinct Powerplay Carbon 90
– Instinct Powerplay Carbon 70
– Instinct Powerplay Alloy 70
– Instinct Powerplay Alloy 50
– Instinct Powerplay Alloy 30
Additional information
Installation | Internal (totally invisible from the outside) |
---|---|
Dimensions | 37 x 22 x 7,5 mm |
Connections | Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring) |
Assistance | Up to 60 km/h approx. |
Compatible motor | Rocky Mountain Dyname 4.0 |
Compatible displays | Any display and handlebar control |
Data displayed (on display or app) | Altered (variables above a certain threshold) |
Device power | No external power supply required |
Reviews
There are no reviews yet.