SpeedFun Furious Evo Box for ETR 3

116,10VAT incl.

SpeedFun Furious Evo is an ebike tuning that allows you to remove the 25 kmH speed block by fully exploiting the potential of the ETR 3 motor.

This tuning is specially designed for ETR 3 engines mostly mounted on Bottecchia e-bikes. This tuning allows you to increase the active assistance up to speeds that can reach 60 KmH by fully exploiting the potential of the motor.

All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time and without the need for connections to the light output.

Vedi di più...


SKU FU_EVO_BOX_ETR3 Category


Share

What is SpeedFun Furious Evo for ETR 3 ebike tuning?

The function of the Furious Evo tuning device for ETR 3 is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).

When the tuning device is active, having no communication with the display, it will show the halved data on the display starting from a certain threshold.

SpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed on ebike with ETR 3 motors mostly mounted on Bottecchia ebike.

The Furiosu Evo tuning device for ETR 3 can be activate/deactivate the tuning with a very practical system (for more information see the instructions). The device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.

 

Ebike with ETR 3 motor where the Furious Evo Box device was successfully installed

(this list is illustrative and not exhaustive)

 

The main features

– It can be assembled/disassembled at any time

– Equipped with original connectors that do not require any physical modification to the ebike wiring

– Allows you to remove the 25 KmH limit up to unlimited speeds (info)

– Installable in a few minutes, ready to use, plug and go!

– Suitable for ETR 3 motors mostly mounted on Bottecchia e-bikes

– Compatible with any type of display or command

– – It is possible to activate/deactivate in a very practical way (more info in the instructions)

– It does not need external batteries or power

 

Assembly and use instructions

Furious Evo Box instructions for ETR 3

 


Additional information
Assistance:

Increase assistance up to over 60 km/h

Display data:

Shows real data up to 20 km/h. Beyond 20 Km/h the data are distorted on the display or on the app

Motor compatibility:

Compatible with ETR 3 engines

Activation / Deactivation:

Activation and deactivation with idle pedaling (for more information see instructions)

Dimensions:

The Furious Evo Box device measures 33 x 30 x 19mm

This site uses cookies to enhance your experience. By continuing to the site you accept their use. More info in our cookies policy.     ACCEPT

ATTENTION, IMPORTANT NOTICE
Once the SpeedFun speed release device has been installed, the electric bicycle, if exceeding the limit of 25 kmH, is equated to a moped and as such, if traveling in public places, it needs to be homologated-registered by the Civil Motorization. subject to the payment of the road tax and insurance coverage, must have a license plate, cannot circulate on cycle paths and the driver is obliged to drive with a license and must use a helmet. In addition, driving a motor bicycle equivalent to a moped that does not comply with the aforementioned provisions entails the administrative seizure of the vehicle and financial penalties that vary according to the infringement committed. The manufacturer of the speed release system declines all responsibility for any damage caused to pedal-assisted bicycles on which the device is mounted as well as direct or indirect damage to people or things.
SpeedFun – Phase B snc declines any responsibility for any anomalies caused by the anti-tuning defenses that the engine manufacturers could activate.
Remember that the modification to the bicycle could invalidate the manufacturer’s warranty.

EBIKE SOFTWARE COMPATIBLE WITH SPEEDFUN DEVICES
The operation of the SpeedFun devices is guaranteed for the software versions of the ebikes released up to the date of purchase of the device itself.
If the ebike is subsequently updated with software for which the SpeedFun device has not been designed, its failure may occur.
Before updating your engine, it is necessary to check the compatibility with your SpeedFun device.

NB: All the brands mentioned on this site are named exclusively to identify the models of engines and bicycles on which our devices are compatible. They are the property of the respective owners and are in no way related to our company.

Use your helmet, save your life!

Contact